Deye

Deye AI-W5.1-B

A 5.12 kWh low-voltage LiFePO4 battery in a sealed IP65 floor cabinet, expandable module by module to 184 kWh across 36 parallel units.

Models Covered: DEYE-AI-W5.1-B

Manufacturer: Ningbo Deye Inverter Technology Co., Ltd

Application: Run your essential loads through the night on a battery that lives happily outdoors. The Deye AI-W5.1-B stores 5.12 kWh, 4.6 kWh of it usable at the recommended 90% depth of discharge, behind an IP65-sealed floor-standing cabinet, so it installs beside the house as readily as inside the garage. Its 51.2 V architecture pairs with low-voltage hybrid inverters, and growth stays simple: connect up to 36 units in parallel for as much as 184 kWh, while the AI-W range itself spans configurations from AI-W5.1-B to AI-W30.7-B. LiFePO4 cells rated for more than 6,000 cycles keep 70% of their capacity at end of life, and a built-in heating function lets the pack accept charge at temperatures down to -20 degrees C. CAN2.0 and RS485 ports handle inverter communication, a 125 A breaker is built in, and the manufacturer covers the unit for 10 years.

Technical Specifications

Technical Specifications
Parameter DEYE-AI-W5.1-B
Battery Data
Energy 5.12 kWh
Usable Energy 4.6 kWh
Module Energy 5.12 kWh
System Energy 5.12 kWh
Max. Capacity 184 kWh
Nominal Voltage 51.2 V
Module Nominal Voltage 51.2 V
System Nominal Voltage 51.2 V
Operating Voltage 44.8-57.6 V
Rated Capacity 100 Ah
Module Capacity 100 Ah
Cell Chemistry LiFePO4
Cycle Life >6000
End-of-Life Capacity 70%
Energy Throughput 16 MWh
Recommended Depth of Discharge 90%
Rated DC Power 2.5 kW
Max. Charge Current 100 A
Max. Discharge Current 100 A
Max. Charge/Discharge Current 100 A
Recommended Charge/Discharge Current 50 A
Peak Discharge Current 150 A
Min. Battery Module Quantity 1
Battery Module Models AI-W5.1-B, AI-W10.2-B, AI-W15.3-B, AI-W20.4-B, AI-W25.6-B, AI-W30.7-B
Parallel Units 36
Built-in Circuit Breaker 125A 2P, 60Vdc
Protection Features BMS Protection
Warranty (Years) 10
Mechanical & Interface
Communication Ports CAN2.0, RS485
Dimensions 720 x 569 x 255 mm
Additional Notes Standard charge: 25±2°C constant current 50A to 57.6V
Module Dimensions 720±3 x 300±1.5 x 254±1.5 mm
Module Weight 53 kg
Status Indicator Battery module: 3LED (working, alarming, protecting); PDU module: 5LED (SOC 20%-100%), 3LED (working, alarming, protecting)
Weight 74.5 kg
Environment & Protection
Altitude <3000 m
Charge Temperature 0-55 (-20 to 55 when heating on) °C
Discharge Temperature -20 to 55 °C
Operating Humidity 5-95 (non-condensing)%
Installation Location Floor-Mounted
Enclosure IP Rating IP65
Storage Temperature 0-35 °C
Cooling Type Natural Cooling
Working Temperature Charge: 0-55 (-20 to 55 when heating on) / Discharge: -20 to 55 °C

Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.

Availability & grid compliance in Germany

Market Germany
Grid authority / regulator Bundesnetzagentur
Quotation currency EUR
Support hours timezone Europe/Berlin
Delivery & installation coverage Berlin, Munich, Hamburg, Frankfurt

Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Germany that is Bundesnetzagentur. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.

Key Features & Technical Highlights

  • Decade-spanning cycle life: LiFePO4 chemistry rated for more than 6,000 cycles while keeping 70% of capacity at end of life.
  • 4.6 kWh ready every night: Each unit yields 4.6 kWh of usable energy at the recommended 90% depth of discharge.
  • Sealed for the outdoors: The IP65 floor-standing cabinet shrugs off dust and water, beside the house or in the garage.
  • Charging through the winter: A built-in heating function lets the pack accept charge at temperatures down to -20 degrees C.
  • Room to grow to 184 kWh: Parallel up to 36 units, with CAN2.0 and RS485 keeping every one in step with the inverter.
  • 16 MWh design throughput: Rated for 16 MWh of energy throughput and covered by a 10-year warranty.

Frequently Asked Questions

Which inverters can the AI-W5.1-B work with?

It is a 51.2 V low-voltage battery with a 44.8-57.6 V operating window, so it pairs with low-voltage hybrid inverters that communicate over CAN2.0 or RS485.

How far can I expand an AI-W5.1-B system?

Up to 36 units can run in parallel, taking total capacity to 184 kWh; the AI-W line spans configurations from AI-W5.1-B up to AI-W30.7-B.

Can the AI-W5.1-B be installed outside?

Yes. The cabinet is rated IP65 and designed for floor mounting, with discharge supported from -20 to 55 degrees C and operation at altitudes up to 3,000 m.

What happens to this battery in cold weather?

Charging normally starts at 0 degrees C, but with the heating function active the pack accepts charge from -20 degrees C, so winter mornings do not lock it out.

How long should the AI-W5.1-B last?

The LiFePO4 cells are rated beyond 6,000 cycles with 70% capacity remaining, design energy throughput is 16 MWh, and the warranty runs for 10 years.