Deye GE-F120-2H6-4H6
Floor-standing 122.8 kWh LiFePO4 storage for the 500-700 V class, rated at 50 kW of DC power and built to grow in parallel with commercial loads.
Technical Specifications
| Parameter | DEYE-GE-F120-2H6-4H6 |
|---|---|
| Battery Data | |
| Energy | 5.12 kWh |
| Module Energy | 5.12 kWh |
| System Energy | 122.8 kWh |
| Max. Capacity | 3600 kWh |
| Nominal Voltage | 51.2 V |
| Module Nominal Voltage | 51.2 V |
| Operating Voltage | 500-700 V |
| Rated Capacity | 100 Ah |
| Cell Chemistry | LiFePO4 |
| Cycle Life | >6000 |
| End-of-Life Capacity | 70% |
| Rated DC Power | 50 kW |
| Max. Charge Current | 36+36+36+36 A |
| Max. Discharge Current | 36+36+36+36 A |
| Max. Charge/Discharge Current | 36+36+36+36 A |
| Recommended Charge/Discharge Current | 100 A |
| Peak Discharge Current | 125 A |
| Max. Round-Trip Efficiency | 89% |
| Parallel Units | 10 |
| Protection Level | I |
| Warranty (Years) | 10 |
| Mechanical & Interface | |
| Communication Ports | CAN, RS485, Wi-Fi, ETH |
| Dimensions | 527 x 894 x 294 mm |
| Additional Notes | DC Injection current(mA): <0.5%ln; AC Output Frequency and V |
| Module Dimensions | 440 x 133 x 570 mm |
| Module Weight | 44 kg |
| Status Indicator | LCD |
| Weight | 2090 kg |
| Environment & Protection | |
| Charge Temperature | 0-55 °C |
| Discharge Temperature | -20 to 55 °C |
| Operating Humidity | 15-85 (non-condensing)% |
| Installation Location | Floor-Mounted |
| Enclosure IP Rating | IP55 |
| Storage Temperature | 0-35 °C |
| Working Temperature | -20 to 55 (>43 derating) °C |
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in Egypt
| Market | Egypt |
| Grid authority / regulator | EgyptERA, NREA |
| Quotation currency | EGP |
| Support hours timezone | Africa/Cairo |
| Delivery & installation coverage | Cairo, Alexandria, Giza, Aswan |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Egypt that is EgyptERA, NREA. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- Modular 122.8 kWh build: Capacity arrives as 44 kg modules of 5.12 kWh, assembled into 122.8 kWh without lifting equipment.
- Strong 50 kW delivery: Rated DC power of 50 kW, with discharge peaking at 125 A and 100 A of recommended continuous current.
- Made for HV inverters: Runs on a 500-700 V DC bus, the territory of high-voltage battery inverters and PCS gear.
- 89% round-trip efficiency: Returns 89% of stored energy over a life exceeding 6,000 cycles down to 70% capacity.
- Protected to IP55: The floor-standing enclosure resists dust and spraying water and carries an LCD readout.
- Networked four ways: Monitoring runs over CAN, RS485, Wi-Fi or ETH, whichever the site prefers.
Frequently Asked Questions
Is the GE-F120 a low-voltage or high-voltage battery?
Although each module is nominally 51.2 V, the assembled system operates at 500-700 V DC, which places it firmly in the high-voltage class alongside HV battery inverters and power-conversion systems.
What is the expansion ceiling for the GE-F120?
Parallel operation is supported for up to 10 systems, and the platform's stated maximum capacity is 3,600 kWh.
Does the GE-F120 come with a warranty?
Yes - the stated term is 10 years, backed by a cycle life above 6,000 cycles and a 70% end-of-life capacity threshold.
How hot or cold can the GE-F120 run?
Discharge is rated from -20 to 55 degrees C and charge from 0 to 55 degrees C; output derates above 43 degrees, and storage belongs between 0 and 35 degrees C.
What does a GE-F120 weigh and where does it stand?
The complete system weighs 2,090 kg and mounts on the floor; each 5.12 kWh module contributes 44 kg, and the enclosure carries an IP55 rating.