Deye RW-F10.2
10.2 kWh modular battery with IP65 protection, 6000 cycles, and auto-networking.
Download PDF Datasheet WhatsApp UsTechnical Specifications
| Parameter | RW-F10.2 |
|---|---|
| General Data | |
| Warranty | 10years |
| Electrical / AC Output Data | |
| Rated AC Power | 6 kW |
| Max Parallel Units | 32 |
| Nominal Voltage | 51.2 V |
| Operating Voltage Range | 43.2~57.6 V |
| Energy Throughput | 32MWh(25°C,0.5C/0.5C.70%EOL)| kWh |
| Status Indicator | SOC state ( 20% ~ 100%), work state (alarming, protecting ) |
| Battery Data | |
| Battery Energy Capacity | 10.2 kWh |
| Max System Capacity | 326 kWh |
| Nominal Capacity | 200 Ah |
| Usable Energy | 9.2 kWh |
| Battery Type / Chemistry | LiFePO4 |
| Cycle Life | ≥ 6000 ( 25°C +2°C, 0.5C / 0.5C, 90%DOD, 70%EOL)| cycles |
| Max Charge Rate (C) | 1C |
| Max Discharge Rate (C) | 1.2C |
| Recommended Charge/Discharge Current | Charge : 198 / Discharge: 240 |
| Recommended DoD | 90% |
| Protection Features | |
| IP Rating | IP65 |
| Built-in Circuit Breaker | 125A 4P, 60Vdc |
| Mechanical Data | |
| Cooling | Natural Cooling |
| Design / Form Factor | Wall-Mounted, Floor-Mounted |
| Installation / Mounting | Wall or Floor Mount |
| Operating Conditions | |
| Max Altitude | ≤3000m |
| Operating Temperature | Charge : 1~55°C / Discharge:-20°C ~ 55 |
| Relative Humidity | 5%~95% |
| Storage Temperature Range | 0°C~35 |
| Communication | |
| Communication Interface | CAN2.0, RS485 |
Note: Specifications are based on the official Deye RW-F10.2 datasheet. Values may be subject to change; always verify against the latest manufacturer documentation before system design and procurement.
Availability & grid compliance in Italy
| Market | Italy |
| Grid authority / regulator | ARERA Italy |
| Quotation currency | EUR |
| Support hours timezone | Europe/Rome |
| Delivery & installation coverage | Rome, Milan, Naples, Turin |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Italy that is ARERA Italy. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- 10.2 kWh Capacity: 9.2 kWh usable at 90% DoD
- IP65 Protection: Indoor and outdoor installation
- 125A Circuit Breaker: Built-in safety protection
- Auto-Networking: No DIP switch coding needed
- Scalable to 326 kWh: Up to 32 units in parallel
- Eco-Friendly: Non-toxic, pollution-free materials
Frequently Asked Questions
What inverters is the DEYE RW-F10.2 compatible with?
The RW-F10.2 pairs with DEYE hybrid and off-grid inverters and most 48V-architecture inverters that support its battery type setting. Confirm the inverter's battery-type (Batt-V) configuration matches before installation.
Is the DEYE RW-F10.2 suitable for hot climates like the Gulf?
Yes. The RW-F10.2 uses LiFePO4 chemistry with a BMS and thermal management designed to operate safely in the high ambient temperatures common across the Middle East and Africa.
What makes the RW-F10.2 easy to install?
The RW-F10.2 features auto-networking modules that eliminate DIP switch coding. The flat design supports both wall-mounted and floor-standing installation, and it integrates seamlessly with Deye inverters.
How much usable energy does it provide?
With 10.2 kWh nominal capacity and 90% depth of discharge, you get 9.2 kWh of usable energy - one of the highest usable ratios in its class.