Deye RW-L10.2

10.24 kWh IP65 battery with 9.22 kWh usable energy and 32-unit scalability.

Models Covered: RW-L10.2

Manufacturer: Ningbo Deye Technology Co., Ltd. (Stock Code: 605117.SH)

Application: The Deye RW-L10.2 is a high-capacity 10.24 kWh residential battery with 200Ah capacity and 9.22 kWh usable energy at 90% DoD. Featuring IP65 protection, built-in circuit breaker, intelligent BMS, and flexible rack/wall mounting, it's ideal for homes needing reliable backup power with scalability up to 327 kWh.

Download PDF Datasheet WhatsApp Us

Technical Specifications

Parameter RW-L10.2
Electrical / AC Output Data
Max Parallel Units 32
Nominal Voltage 51.2 V
Operating Voltage Range 44.8~57.6 V
Energy Throughput 16MWH kWh
Battery Data
Battery Energy Capacity 10.24 kWh
Max System Capacity 327.68 kWh
Nominal Capacity 200 Ah
Usable Energy 9.22 kWh
Battery Type / Chemistry LiFePO4
Cycle Life ≥6000 cycles
Peak Charge/Discharge Current 300/300 (10 sec) A
Recommended DoD 90%
Protection Features
IP Rating IP65
Certification / Compliance Safety UN38.3, MSDS
Mechanical Data
Installation / Mounting Wall-Mounted, Floor-Mounted
Operating Conditions
Max Altitude ≤2000m
Operating Temperature -20 to 55 °C
Relative Humidity 0 ~ 95%
Storage Temperature Range 0℃～35℃ °C
Communication
Communication Interface CAN2.0, RS485
Display LCD(SOC and working state)

Note: Specifications are based on the official Deye RW-L10.2 datasheet. Values may be subject to change; always verify against the latest manufacturer documentation before system design and procurement.

Availability & grid compliance in Netherlands

Market Netherlands
Grid authority / regulator ACM Netherlands
Quotation currency EUR
Support hours timezone Europe/Amsterdam
Delivery & installation coverage Amsterdam, Rotterdam, The Hague, Utrecht

Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Netherlands that is ACM Netherlands. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.

Key Features & Technical Highlights

  • 10.24 kWh Capacity: 9.22 kWh usable at 90% DoD
  • IP65 Protection: Waterproof and dustproof
  • Built-in Circuit Breaker: Enhanced safety protection
  • Scalable to 327 kWh: Up to 32 units in parallel
  • Flexible Mounting: Rack or wall installation
  • Remote Monitoring: Deye platform compatible

Frequently Asked Questions

What inverters is the DEYE RW-L10.2 compatible with?

The RW-L10.2 pairs with DEYE hybrid and off-grid inverters and most 48V-architecture inverters that support its battery type setting. Confirm the inverter's battery-type (Batt-V) configuration matches before installation.

Is the DEYE RW-L10.2 suitable for hot climates like the Gulf?

Yes. The RW-L10.2 uses LiFePO4 chemistry with a BMS and thermal management designed to operate safely in the high ambient temperatures common across the Middle East and Africa.

What's the usable energy of the RW-L10.2?

At 90% depth of discharge, you get 9.22 kWh of usable energy from the 10.24 kWh nominal capacity - excellent efficiency for residential backup.

Can I install it outdoors?

Yes! The IP65 rating means it's waterproof and dustproof, suitable for both indoor and outdoor installations.