Deye GB-L-PRO
High voltage stack battery with 4kWh modules, explosion relief, and fire protection.
Technical Specifications
| Parameter | DEYE-GB-L-PRO |
|---|---|
| Additional Specifications | |
| Usable Energy | 7.2 kWh |
| System Energy | 8 kWh |
| Cell Chemistry | LiFePO4 |
| Charge / Discharge Current ( A ) - Nominal | 40 |
| Charge / Nominal | 40 |
| GB-L-Pro-Pack-4.1-2 - Nominal Charge/Discharge Current | 40A |
| GB-L-Pro-Pack-4.1-2 - Rated Capacity | 40Ah |
| Module Energy | 4 kWh |
| Battery Chemistry | LiFePO4 |
| GB-L-Pro-Pack-4.1-2 - Ingress Protection | IP65 |
| Discharge Peak Discharge Working Temperature | Charge: -20 ~ 55 / Discharge: -20 ~ 55 °C |
| Communication | |
| Communication Interface | CAN2.0, RS485 |
| Display | Total Voltage |
| Monitoring Module | LCD Display, Remote Updates |
| Battery Data | |
| Module Capacity | 40 Ah |
| Cycle Life | ≥6000 cycles |
| Max Charge/Discharge Current | 40A |
| Electrical / AC Output Data | |
| Module Nominal Voltage | 102.4 V |
| Operating Voltage Range | 166.4~700.8 V |
| General Data | |
| Available Models / Configurations | GB-L8 to GB-L24 PRO |
| Mechanical Data | |
| Design / Form Factor | Floor Mount |
| Protection Features | |
| IP Rating | IP65 |
| Protection Features | Explosion Relief, Fire Protection |
| Operating Conditions | |
| Max Altitude | ≤2000m |
| Relative Humidity | 5% ~ 90% |
| Storage Temperature Range | 0 ~ 35 °C |
| Operating Temperature | -20 to 55 °C |
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Configurations & shipping weights
| Configuration | Weight | Dimensions (W × D × H) |
|---|---|---|
| GB-L8-Pro — 8 kWh (2 × 4 kWh modules) | 97 kg | 540 × 385 × 650 mm |
| GB-L12-Pro — 12 kWh (3 × 4 kWh modules) | 136 kg | 540 × 385 × 870 mm |
| GB-L16-Pro — 16 kWh (4 × 4 kWh modules) | 175 kg | 540 × 385 × 1090 mm |
| GB-L20-Pro — 20 kWh (5 × 4 kWh modules) | 214 kg | 540 × 385 × 1310 mm |
| GB-L24-Pro — 24 kWh (6 × 4 kWh modules) | 253 kg | 540 × 385 × 1530 mm |
This listing covers several shippable configurations. Each row is the manufacturer’s stated figure for that build; the page weight above is the smallest one, which is what a single unit ships at.
Availability & grid compliance in Sudan
| Market | Sudan |
| Grid authority / regulator | Sudanese Electricity Distribution Company (SEDC), Ministry of Energy and Petroleum |
| Quotation currency | SDG |
| Support hours timezone | Africa/Khartoum |
| Delivery & installation coverage | Khartoum, Omdurman, Port Sudan, Kassala, Nyala |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Sudan that is Sudanese Electricity Distribution Company (SEDC), Ministry of Energy and Petroleum. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- High Voltage System: 102.4V modules, up to 700V system
- Fire Protection: Explosion relief and fire safety devices
- Thermal Monitoring: Continuous temperature monitoring
- IP65 Protection: Dust and water resistant
- LCD Display: Real-time battery status
- Remote Updates: Firmware updates over the air
Frequently Asked Questions
Is the DEYE GB-L Pro suitable for hot climates like the Gulf?
Yes. The GB-L Pro uses LiFePO4 chemistry with a BMS and thermal management designed to operate safely in the high ambient temperatures common across the Middle East and Africa.
What configurations are available?
The GB-L Pro series includes GB-L8 PRO through GB-L24 PRO models, allowing you to choose the right capacity for your needs from 8 kWh to 24 kWh.
What safety features does it have?
The GB-L Pro features explosion relief devices, fire protection systems, continuous thermal monitoring, and IP65 protection for comprehensive safety.