Deye MS-G215-2H3
215kWh C&I energy storage with 100kW power, scalable to 2MW/4.3MWh, and intelligent control.
Technical Specifications
| Parameter | DEYE-MS-G215-2H3 |
|---|---|
| Additional Specifications | |
| AC Output Rated Current (A) | 152 |
| Anti-Corrosion Grade | ≤C5 |
| DC Injection Current | <0.5ln |
| MPPT Voltage Range(V) | 180-750 |
| Max. AC Output Current (A) | 167 |
| Max.Efficiency | 97.6% |
| Max.Input Voltage(V) | 800 |
| Output Rated Power (kW) | 1 |
| Start Voltage(V) | 200 |
| System Certification | UN3536, IEC61000, IEC62477,JEC60730 |
| AC Output Frequency and Voltage | 50/60Hz; 380/400VaC |
| AC Output Power(kW) | 100 |
| Battery Operating Voltage (Vd.c.) | 660-864 |
| System Energy | 215 kWh |
| Overvoltage Protection | DC TypeⅡ/AC TypeⅡ |
| Peak Power | 1.1 times of rated power |
| Power Factor | -1~1 |
| Protection Level | Class 1 |
| System Communication | ETH/4G |
| THD | <3% |
| Max.Number of Parallel (off-grid) | 10 pcs (off-grid) |
| Number of MPPT | 8 pcs |
| Display | LCD |
| Dimension（W×D×H,mm） | 506×772×310 |
| Relative Humidity | 15%~85% (No Condensing) |
| Electrical / AC Output Data | |
| Full Load Voltage Range (V) | 1 |
| Grid Regulation | CEI0-21, CEI-016, |
| Grid Type / Phase | 3L/N/PE |
| Operating Voltage Range | 660-864 V |
| Max Parallel Units | 20 (2MW/4.3MWh) |
| Overload Capability | 1.1x |
| Electrical Data | |
| PV Input Power（kW） | 200 |
| Battery Data | |
| Round-Trip Efficiency | 88% |
| Battery Type / Chemistry | LiFePO₄ |
| Battery Energy Capacity | 215 kWh |
| Cycle Life | ≥6,000 cycles |
| End-of-Life Capacity | 70% |
| PV String Input Data | |
| Max PV Input Power | 200 KW |
| Protection Features | |
| IP Rating | IP54 |
| Operating Conditions | |
| Corrosion Rating | C5 |
| System Operating Temperature Range (°C) | -20-50 (>45 Derating) |
| Operating Temperature | -20 to 50 °C |
| Max Altitude | 3,000 m |
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in Sudan
| Market | Sudan |
| Grid authority / regulator | Sudanese Electricity Distribution Company (SEDC), Ministry of Energy and Petroleum |
| Quotation currency | SDG |
| Support hours timezone | Africa/Khartoum |
| Delivery & installation coverage | Khartoum, Omdurman, Port Sudan, Kassala, Nyala |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Sudan that is Sudanese Electricity Distribution Company (SEDC), Ministry of Energy and Petroleum. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- 215kWh Capacity: Large-scale energy storage
- Scalable to 4.3MWh: Up to 20 units on-grid
- Fire Suppression: Aerosol & explosion-proof
- Temp Control: Battery <35°C
- Integrated EMS/PCS/BMS: Intelligent control
- Peak-Valley Mgmt: Demand control & backup
Frequently Asked Questions
Is the DEYE MS-G215-2H3 suitable for hot climates like the Gulf?
Yes. The MS-G215-2H3 uses LiFePO4 chemistry with a BMS and thermal management designed to operate safely in the high ambient temperatures common across the Middle East and Africa.
How scalable is this system?
The MS-G215-2H3 can be scaled up to 20 units for on-grid (2MW/4.3MWh), 10 units for off-grid (1MW/2.15MWh), or 5 units for backup (500kW/1MWh) applications.
What safety features does it have?
5-level extreme safety protection including LFP batteries, aerosol fire extinguishing, auto-venting, explosion-proof battery compartment, and comprehensive gas/smoke/temperature detection.