Deye SS-F10/F5
10.24kWh high voltage LiFePO₄ home ESS with integrated cell-to-pack design and IP65 protection.
Technical Specifications
| Parameter | DEYE-SS-F10 | DEYE-SS-F5 |
|---|---|---|
| Communication | ||
| Communication Interface | CAN2,0/ RS485 | |
| Battery Data | ||
| Battery Type / Chemistry | LiFePO4 | |
| Nominal Capacity | 20 Ah | |
| Max Discharge Current | 20 A | |
| Recommended DoD | 90% | |
| Cycle Life | ≥6,000 cycles | |
| End-of-Life Capacity | 70% | |
| Electrical / AC Output Data | ||
| Battery System Energy | 10 kWh | 5 kWh |
| Battery System Operating Voltage | 448 ~ 584 Vdc | 224 ~ 292 Vdc |
| Battery System Nominal Voltage | 512 Vdc | 256 Vdc |
| Nominal Voltage | 512 V | |
| Operating Voltage Range | 448-584 V | |
| Max Parallel Units | 6 (60kWh) | |
| Additional Specifications | ||
| Recommended Discharge | 10 A | |
| Ambient Operating Temperature | Zaryadlash/zaryadsizlanish: -20 ~ 55 °C | |
| Altitude | 3000m | |
| Protection Features | ||
| IP Rating | IP65 | |
| Mechanical Data | ||
| Installation / Mounting | Wall/Floor mount | |
| Operating Conditions | ||
| Relative Humidity | 0 ~ 100 | |
| Operating Temperature | -20 to 55 °C | |
| Max Altitude | 3,000 m | |
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in Sudan
| Market | Sudan |
| Grid authority / regulator | Sudanese Electricity Distribution Company (SEDC), Ministry of Energy and Petroleum |
| Quotation currency | SDG |
| Support hours timezone | Africa/Khartoum |
| Delivery & installation coverage | Khartoum, Omdurman, Port Sudan, Kassala, Nyala |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Sudan that is Sudanese Electricity Distribution Company (SEDC), Ministry of Energy and Petroleum. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- 10kWh Capacity: Scalable to 60kWh
- Cell-to-Pack Design: Integrated BMS
- IP65 Protection: Waterproof enclosure
- Visual Diagnostics: SOC & fault code display
- Flexible Install: Wall or floor mounting
- 3000m Altitude: High altitude operation
- 5kWh Capacity: Compact energy storage
- Cell-to-Pack: Integrated BMS design
- Long Life: ≥6,000 cycles
- Wide Temp Range: -20°C to 55°C
Frequently Asked Questions
Is the DEYE SS-F10 suitable for hot climates like the Gulf?
Yes. The SS-F10 uses LiFePO4 chemistry with a BMS and thermal management designed to operate safely in the high ambient temperatures common across the Middle East and Africa.
What is cell-to-pack design?
Cell-to-pack design simplifies the internal structure by integrating cells directly into the pack with integrated BMS, reducing complexity and improving reliability.
Can I expand this system?
Yes! You can connect up to 6 units in parallel for a maximum capacity of 60kWh, providing flexibility for growing energy needs.
Is the DEYE SS-F5 suitable for hot climates like the Gulf?
Yes. The SS-F5 uses LiFePO4 chemistry with a BMS and thermal management designed to operate safely in the high ambient temperatures common across the Middle East and Africa.
What is the difference between SS-F5 and SS-F10?
The SS-F5 offers 5kWh capacity while the SS-F10 offers 10kWh. Both share the same high-quality LiFePO₄ chemistry, IP65 protection, and integrated design, with the SS-F10 providing double the storage capacity.
Is this suitable for European installations?
Yes! The SS-F5 is specifically designed for the European market with appropriate certifications and compliance with European standards.