Deye SUN-9-10-5K-G02P1/SUN-9K-G02P1-EU-AM2
10.5kW high-power single phase string inverter with 97.7% efficiency and dual MPPT.
Technical Specifications
| Parameter | SUN-10.5K-G02P1-EU-AM2 | SUN-10K-G02P1-EU-AM2 | DEYE-SUN-9-10-5K-G02P1 | SUN-9K-G02P1-EU-AM2 |
|---|---|---|---|---|
| Additional Specifications | ||||
| Arc fault circuit interrupter (AFCI) | Optional | |||
| MPPT Voltage Range(V) | 70-500 | |||
| Max. Input Short Circuit Current (A) | 39+39 | |||
| Max. Operating PV Input Current(A) | 26+26 | |||
| Max. Output Overcurrent Protection (A) | 110 | |||
| Max. PV Input Voltage(V) | 550 | |||
| PV Input Voltage Range(V) | 80-550 | |||
| Rated Output Grid Frequency/range(Hz) | 65Hz | 45Hz-55Hz, 60Hz/55Hz- | — | 50Hz/ |
| Rated Output voltage/range (V) | 220/230V 0.85Un-1.1Un | |||
| Rated PV Input Voltage(V) | 360 | |||
| Start-up Voltage(V) | 80 | |||
| No. of Strings MPP Tracker | 2+2 | |||
| Grid Connection Form | L+N+PE | |||
| Ground fault current monitoring | yes | |||
| Max. Inverter Backfeed Current To the Array | 0 | |||
| Max. PV Input Voltage (V) Start-up Voltage | 80 V | |||
| Overvoltage Load Drop Protection | yes | |||
| Power Network Monitoring | yes | |||
| Residual Current (RCD) Detection | yes | |||
| Start-up DC Input Voltage | 80 V | |||
| AC Output Overcurrent Protection | yes | |||
| AC Output Overvoltage Protection | yes | |||
| AC Output Short Circuit Protection | yes | |||
| DC Input Switch | yes | |||
| DC component monitoring | yes | |||
| Monitor Mode | GPRS/WIFI/Bluetooth/4G/LAN (optional) | |||
| Ingress Protection(IP) Rating | IP 65 | |||
| Rated AC Input/Output Active Power | 10000 W | |||
| Max. AC Input/Output Apparent Power | 11000 VA | |||
| Rated AC Input/Output Current | 15.2/14.5 A | |||
| Max. AC Input/Output Current | 16.7/15.9 A | |||
| Max. Three-phase Unbalanced Output Current | 22.7/21.7 A | |||
| Max. Output Overcurrent Protection | — | 70 A | 110 A | — |
| Electrical / AC Output Data | ||||
| Full Load MPPT Voltage Range(V) | 265-500 | 250-500 | 225-500 | 225-500 |
| Max. AC Output Apparent Power(KVA) | 11.55 | 11 | 9.9 | 9.9 |
| Max. AC Output Current(A) | 52.5/50.3 | 50/47.9 | — | 45/43.1 |
| Max. Output Fault Current(A) | 91.4 | 87 | — | 78.4 |
| Max. PV Input Power(kW) | 15.8 | 15 | 13.5 | 13.5 |
| Rated AC Output Active Power(kW) | 10.5 | 10 | — | 9 |
| European Efficiency | 97.2% | |||
| Topology | Non-Isolated | |||
| Max. AC Output Apparent Power | 11.55 kVA | 11 kVA | — | 9.9 kVA |
| Max. AC Output Current | 52.5/50.3 A | 50/47.9 A | — | 45/43.1 A |
| Adjustable Power Factor Range | 0.8 leading to 0.8 lagging | |||
| Rated AC Output Current | 47.8/45.7 A | 45.5/43.5 A | — | 41/39.2 A |
| Grid / AC Frequency | 50/45-55, 60/55-65 Hz | |||
| Nominal AC Voltage | 220/230 0.85Un-1.1Un L/N/PE | |||
| THD / THDi | <3% | |||
| DC Injection Current | <0.5%ln | <0.5%In | — | <0.5%In |
| DC Polarity Reverse Connection Protection | yes | Yes | — | — |
| DC Terminal Insulation Impedance Monitoring | yes | Yes | — | — |
| Rated AC Power | 10.5 kW | 10 kW | — | 9 kW |
| Max Operating Current | 26+26 A | |||
| Phase | Single-phase | Single-phase | Single Phase | Single-phase |
| Max Continuous AC Pass-Through | 45 A | |||
| Electrical Data | ||||
| Max Efficiency | 97.7% | |||
| No. of MPP Trackers/ No. of Strings MPP Tracker | 2/2+2 | |||
| Rated AC Output current (A) | 47.8/45.7 | 45.5/43.5 | 41/39.2 | 41/39.2 |
| PV Input Voltage Range | 80-550 V | |||
| Max PV Voltage | 550 V | |||
| Full Load MPPT Voltage Range | 265-500 V | 250-500 V | — | 225-500 V |
| Max. Output Fault Current | 91.4 A | 87 A | — | 78.4 A |
| Rated AC Output Active Power | 10.5 kW | 10 kW | — | 9 kW |
| Rated Output voltage/range | 220/230V 0.85Un-1.1Un | |||
| No. of MPP Trackers | 2 | |||
| Rated Power | 9-10.5kW | |||
| General Data | ||||
| Inverter Type | String Inverter | |||
| Protection Features | ||||
| Anti-Islanding Protection | Yes | |||
| Grid Connection Standards | IEC 61727, IEC 62116, EN 50549, NRS 097, RD 140, UNE 217002, G99 | |||
| Overvoltage Category | OVC II(DC), OVC III(AC) | |||
| Safety / EMC Standards | IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 | |||
| AC/DC Surge Protection | TYPE II(DC), TYPE II(AC) | |||
| Over-Temperature / Thermal Protection | Yes | |||
| IP Rating | IP65 | |||
| Communication | ||||
| Communication Interface | RS485/RS232 /WiFi/LAN | |||
| Display | LCD1602 | |||
| PV String Input Data | ||||
| MPPT Efficiency | >99% | |||
| MPPT Voltage Range | 70-500 V | |||
| Max. Input Short Circuit Current | 39+39 A | |||
| Max. Operating PV Input Current | 26+26 A | |||
| Max. PV Input Power | 15.8 kW | 15 kW | — | 13.5 kW |
| Max. PV Input Voltage | 550 V | |||
| Rated PV Input Voltage | 360 V | |||
| Start-up Voltage | 80 V | |||
| Number of MPP Trackers | 2 | |||
| Mechanical Data | ||||
| Cooling Method | Natural Cooling | Natural Cooling | — | Natural cooling |
| Cooling | Natural Cooling | |||
| Type Of Cooling | Natural cooling | |||
| Operating Conditions | ||||
| Noise Level | ≤35 dB | |||
| Operating Temperature | -25 to +60℃, >45℃ Derating | -25 to +60℃, >45℃ Derating | -25 to +60 ℃ | -25 to +60℃, >45℃ Derating |
| Max Altitude | 3000m | |||
| Relative Humidity | 0-100% | |||
| Operating Temperature Range | -25 to +60℃, >45℃ Derating | |||
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in Sudan
| Market | Sudan |
| Grid authority / regulator | Sudanese Electricity Distribution Company (SEDC), Ministry of Energy and Petroleum |
| Quotation currency | SDG |
| Support hours timezone | Africa/Khartoum |
| Delivery & installation coverage | Khartoum, Omdurman, Port Sudan, Kassala, Nyala |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Sudan that is Sudanese Electricity Distribution Company (SEDC), Ministry of Energy and Petroleum. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- 97.7% Efficiency: High energy conversion
- Dual MPPT: Two independent trackers
- 80V Start-up: Works in low-light conditions
- Zero Export: Manage grid export limits
- Anti-PID: Prevents panel degradation
- Multiple Comms: GPRS, WiFi, Bluetooth, 4G, LAN
- 9-10.5kW Output: High efficiency power conversion
- Wide MPPT Range: Optimized for various solar configurations
- IP65 Protection: Suitable for outdoor installation
- Smart Monitoring: Real-time performance tracking
Frequently Asked Questions
Is the DEYE SUN-10.5K-G02P1-EU-AM2 suitable for the Middle East climate?
Yes. DEYE inverters are rated for high ambient temperatures and dusty conditions common across the Gulf, North Africa and the wider MEA region, with IP-rated enclosures for outdoor installation in shaded areas.
What is the maximum PV input power?
The SUN-9K model supports up to 13.5kW PV input, the SUN-10K supports 15kW, and the SUN-10.5K supports 15.8kW, allowing for high DC/AC ratios.
Is this suitable for commercial applications?
Yes! With power ratings up to 10.5kW and advanced features like zero export and VSG support, it's ideal for both larger residential and commercial solar installations.
What is the warranty period?
This inverter comes with a 5-year standard warranty, with options for extended warranty available.
Can this be used for off-grid systems?
This is primarily designed for grid-tied systems. For off-grid applications, consider our hybrid inverter range.