Deye GE-FH60-FL60
61.44kWh modular C&I energy storage with integrated EMS, BMS, and inverter.
Technical Specifications
| Parameter | DEYE-GE-FH60-FL60 |
|---|---|
| Additional Specifications | |
| AC Output Rated Current (A) | 72.3 |
| Air Flow Volume | 630m³/h |
| Electric Shock Prevention | | |
| Ingress Protection | IP20 |
| Max Operating Pressure | 2.7Mpa |
| Max.Discharge Pressure | 2.7Mpa |
| Max.Suction Pressure | 1.6Mpa |
| Maximum Overcurrent Protection | 10A |
| Minimum Circuit Ampacity | 5.3A |
| Rated Current of Power conversion equipment | 8.5A |
| Rated Heating Current | 7.9A |
| Rated Heating Power Input | 1700W |
| Rated Voltage | AC 240V |
| Refrigerant | R134a/330g |
| Water-proof Class | IP55 |
| AC Output Frequency and Voltage | 50/60Hz; 3L/N/PE 277/480Vac |
| Battery Chemistry | LiFePO4 |
| Battery Module Energy | 5.12 kWh |
| Battery Operating Voltage | 480~700 V |
| Max. Charge/Discharge Current | 125A |
| Nominal Charge/Discharge Current | 100A |
| Peak. Discharge Current | 125A |
| Rated Heating Capacity | 1650W |
| Modules in Series (FL60) | 6 |
| Nominal Discharge | 100 A |
| Peak Discharge | 125 A |
| Rated Cooling Current | 4.15A |
| Rated Cooling Power Input | 900W |
| Dimension (W x D x H,mm) | 735x1045x2235（no contain inverter） |
| Net Weight | 1095 kg |
| Rated Cooling Capacity | 2100W |
| IP Rating of Enclosure | IP55 |
| Operating Temperature Range | Charge: 0~55℃/Discharge: -20℃~55℃ |
| Electrical / AC Output Data | |
| System Capacity | 61.44 kWh |
| AC Output Rated Current | 72.3 A |
| Nominal Voltage | 51.2 V |
| Grid Type / Phase | Three phase |
| AC Grid Connection Type | phase |
| Rated AC Power | 60000 W |
| Operating Voltage Range | 120 ～ 750Vdc |
| Frequency / Frequency Range | 60Hz |
| System Nominal Voltage | 307.2 V |
| Communication | |
| BMS Communication | CAN |
| Protection Features | |
| Certifications | FCC, UL1973,UL9540A , UN38.3 |
| IP Rating | IP55 |
| Battery Data | |
| Battery Type / Chemistry | LiFePO4(LFP) |
| Cycle Life | ≥6000(@25℃±2℃,0.5C/0.5C,70%EOL) |
| Maximum Charging Efficiency | 91% |
| Module Capacity | 100 Ah |
| Module Energy | 5.12 kWh |
| Nominal Capacity | 200 Ah |
| Depth of Discharge | 90% |
| Recommended Charge/Discharge Current | 50 A |
| Scalability / Max Expandable Capacity | 3,600 kWh |
| Charge Temperature Range | 0~55°C |
| Discharge Temperature Range | -20 ℃ ～ 55°C |
| Mechanical Data | |
| Installation / Mounting | Floor-Mounted |
| Operating Conditions | |
| Relative Humidity | 5 ~ 85 |
| Storage Temperature Range | 0 ℃ ～ 35°C |
| Operating Temperature | -30 to 60 °C |
| Max Altitude | 2,000 m |
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in Yemen
| Market | Yemen |
| Grid authority / regulator | Public Electricity Corporation (PEC), Ministry of Electricity and Energy |
| Quotation currency | YER |
| Support hours timezone | Asia/Aden |
| Delivery & installation coverage | Sana'a, Aden, Taiz, Al Hudaydah, Mukalla |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Yemen that is Public Electricity Corporation (PEC), Ministry of Electricity and Energy. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- LiFePO₄ Chemistry: Stable, long-life cells
- Modular Design: 5.12kWh modules, 61.44kWh total
- Flexible Expansion: Parallel up to 3,600kWh
- Integrated EMS & BMS: Built-in energy & battery management
- Fire Suppression: Aerosol fire protection
- Advanced Safety: Gas, smoke & temp detection
Frequently Asked Questions
Is the DEYE GE-FH60 & GE-FL60 suitable for hot climates like the Gulf?
Yes. The GE-FH60 & GE-FL60 uses LiFePO4 chemistry with a BMS and thermal management designed to operate safely in the high ambient temperatures common across the Middle East and Africa.
What's the difference between GE-FL60 and GE-FH60?
GE-FL60 uses 6 modules in series (307.2V, 200Ah) while GE-FH60 uses 12 modules (614.4V, 100Ah). Both provide 61.44kWh total capacity with different voltage configurations.
Can I expand this system?
Yes! The system supports battery expansion up to 3,600kWh for off-grid applications, with hot-swappable modules for easy scaling.