Deye

Deye SE-F5-PRO

The Pro tier of Deye's compact 51.2 V pack makes all 5.12 kWh usable, runs 1C charge and discharge, and layers an active fuse and breaker under VDE2510-50 certification.

Models Covered: DEYE-SE-F5-PRO

Manufacturer: Ningbo Deye Inverter Technology Co., Ltd

Application: Deye's SE-F5 Pro removes the usual gap between rated and usable energy: the datasheet lists both at 5.12 kWh. It also lifts sustained performance to a full 1C - 100 A charge and discharge - with 150 A peaks held for 120 seconds rather than the ten seconds typical of its siblings. Protection is layered: a BMS, an active fuse and a built-in circuit breaker, in a pack certified to VDE2510-50, UN38.3, CE, CB and MSDS. The working temperature spans -20 to 55 degrees Celsius, and natural cooling keeps the enclosure fanless. Communication runs over CAN and RS485, with optional Wi-Fi plus Bluetooth and app monitoring. Clusters combine up to six packs, and systems extend to 64 packs with a CAN-Box - 32 in plain parallel - toward a 163.84 kWh maximum. At 404 x 547 x 141 mm and 44 kg it wall-, floor- or stack-mounts, with a 50 A recommended operating current and a stated 10-year warranty.

Technical Specifications

Technical Specifications
Parameter DEYE-SE-F5-PRO
Battery Data
Energy 5.12 kWh
Usable Energy 5.12 kWh
Max. Capacity 163.84 kWh
Nominal Voltage 51.2 V
Operating Voltage 44.8-57.6 V
Rated Capacity 100 Ah
Cell Chemistry LiFePO4
Cycle Life >6000
End-of-Life Capacity 70%
Energy Throughput 16 MWh
Recommended Depth of Discharge 90%
Max. Charge Rate 1C
Max. Discharge Rate 1C
Max. Charge Current 100 A
Max. Discharge Current 100 A
Max. Charge/Discharge Current 100 A
Recommended Charge/Discharge Current 50 A
Peak Discharge Current 150 (120s) A
Min. Battery Module Quantity 1
Parallel Units 32
Built-in Circuit Breaker Circuit Breaker
Protection Features BMS Protection, Active Fuse
Warranty (Years) 10
Mechanical & Interface
Communication Ports CAN2.0, RS485, Wi-Fi+Bluetooth+APP (optional)
Communication Protocol CAN, RS485
Dimensions 404 x 547 x 141 mm
Additional Notes Peak charge current 150 (120s); Max 64 pcs parallel with CAN-Box; 6 packs per cluster
Status Indicator LED (SOC, working, protecting), Buzzer
Weight 44 kg
Environment & Protection
Altitude <3000 m
Charge Temperature 0-55 °C
Discharge Temperature -20 to 55 °C
Operating Humidity 0-95%
Installation Location Wall-Mounted, Floor-Mounted, Stack-Mounted
Enclosure IP Rating IP21
Storage Temperature 0-35 °C
Cooling Type Natural Cooling
Working Temperature -20 to 55 °C

Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.

Availability & grid compliance in Yemen

Market Yemen
Grid authority / regulator Public Electricity Corporation (PEC), Ministry of Electricity and Energy
Quotation currency YER
Support hours timezone Asia/Aden
Delivery & installation coverage Sana'a, Aden, Taiz, Al Hudaydah, Mukalla

Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Yemen that is Public Electricity Corporation (PEC), Ministry of Electricity and Energy. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.

Key Features & Technical Highlights

  • Zero stranded capacity: Usable energy equals rated energy: the full 5.12 kWh of the pack is listed as available.
  • True 1C performance: 100 A continuous charge and discharge, with a 150 A peak sustained for 120 seconds.
  • Triple-layer protection: An active fuse and a built-in circuit breaker back up the BMS.
  • VDE2510-50 certified: Certification spans VDE2510-50, UN38.3, CE, CB and MSDS documentation.
  • Wide working range: Operates from -20 to 55 degrees Celsius with fanless natural cooling.
  • Optional Wi-Fi on board: CAN and RS485 protocols, with optional Wi-Fi plus Bluetooth and app monitoring.

Frequently Asked Questions

How does the SE-F5 Pro differ from the SE-F5 and SE-F5 Plus?

It makes the entire 5.12 kWh usable, sustains 1C (100 A) in both directions, holds its 150 A peak for 120 seconds, and adds VDE2510-50 certification with an active fuse and a circuit breaker.

What inverters can the SE-F5 Pro pair with?

Low-voltage hybrid inverters built around 51.2 V nominal (44.8-57.6 V operating); the protocol options are CAN and RS485.

Can the SE-F5 Pro be monitored remotely?

Beyond CAN2.0 and RS485, Deye offers optional Wi-Fi together with Bluetooth and an app for this model.

What are the expansion limits of the SE-F5 Pro?

Six packs form a cluster, and a system may reach 64 packs with a CAN-Box - 32 without - up to 163.84 kWh in total.

What warranty and cycle rating does the SE-F5 Pro state?

Deye states 10 years, with a cycle life above 6,000 cycles to 70% end-of-life capacity and a 16 MWh throughput rating.