Deye SUN-12/14/16K-SG01LP1-EU
12kW single phase hybrid inverter with 290A charging and dual battery inputs.
Technical Specifications
| Parameter | DEYE-SUN-12K-SG01LP1-EU | DEYE-SUN-14K-SG01LP1-EU | DEYE-SUN-16K-SG01LP1-EU |
|---|---|---|---|
| Additional Specifications | |||
| Max PV Voltage | 500 | ||
| Grid Frequency | 50Hz/45Hz-55Hz 60Hz/55Hz-65Hz | ||
| Rated output voltage | 220/230V | ||
| Peak Power (off-grid)(W) | 2 | ||
| Anti-islanding protection | Yes | ||
| Charging Strategy for Li-ion Battery | Self-adaption to BMS | ||
| Full Load MPPT Voltage Range | 250-425 V | ||
| Grid Connection Form | L+N+PE | ||
| LCD/LED Display | LCD | ||
| Max. PV Input Voltage | 500 V | ||
| Monitor Mode | GPRS/WIFI/Bluetooth/4G/LAN(optional) | ||
| Number of Battery Input | 2 | ||
| Rated Input/Output Grid Frequency/Range | 50Hz/45Hz-55Hz 60Hz/55Hz-65Hz | ||
| Residual Current Detection | Yes | ||
| Battery Inputs | 2 | ||
| MPPT Trackers | 2 | ||
| PV Input Voltage Range | 125-500 V | ||
| DC Injection Current | <0.5%In | ||
| Insulation Impedance detection | Yes | ||
| Max. Output Overcurrent Protection | 195 A | ||
| Ingress Protection(IP) Rating | IP 65 | ||
| Operating Temperature Range | -40 to +60℃, >45℃ Derating | ||
| Electrical / AC Output Data | |||
| AC Grid Connection Type | Hybrid Inverter | ||
| European Efficiency | 96.5% | ||
| Topology | Non-Isolated (solar), Isolated (battery) | ||
| Max AC Apparent Power | 13200 VA | 15400 VA | 17600 VA |
| Max AC Output Current | 60/57.4 A | 70/67 A | 80/76.5 A |
| Max. Charging Current | 220 A | 250 A | 290 A |
| Max. Charging/Discharging Current | 220 A | 250 A | 290 A |
| Max Continuous AC Pass-Through | 100 A | ||
| Max. Discharging Current | 220 A | 250 A | 290 A |
| Max Efficiency | 97.6% | ||
| Max Inverter Backfeed Current | 0 | ||
| Adjustable Power Factor Range | 0.8 leading to 0.8 lagging | ||
| Rated AC Input/Output Active Power | 12000 W | 14000 W | 16000 W |
| Rated AC Output Current | 54.5/52.2 A | 63.6/60.9 A | 72.7/69.6 A |
| Nominal AC Voltage Range | 220V/230V 0.85Un-1.1Un | ||
| Output Voltage Range | 220/230V 0.85Un-1.1Un L+N+PE | ||
| THD / THDi | <3% (of nominal power) | ||
| Peak / Surge Power (W) | 2 times of rated power, 10s | ||
| Rated AC Power | 12000 W | 14000 W | 16000 W |
| Max Parallel Units | 16 pcs | ||
| Max. Output Fault Current | 120 A | 140 A | 160 A |
| Phase | Single-phase | ||
| Battery Data | |||
| Supported Battery Type | Lead-acid or Lithium-ion | ||
| Battery Voltage Range | 40-60 V | ||
| Max Charge Current | 220 A | 250 A | 290 A |
| Communication | |||
| Communication Interface | WIFI, RS485, CAN | ||
| Display | Colorful Touch LCD | ||
| Protection Features | |||
| Grid Connection Standards | IEC 61727,IEC 62116,NRS 097 | ||
| Overvoltage Category | OVC II(DC), OVC III(AC) | ||
| Safety / EMC Standards | IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 | ||
| AC/DC Surge Protection | TYPE II(DC), TYPE II(AC) | ||
| Over-Temperature / Thermal Protection | Yes | ||
| DC Reverse Polarity Protection | Yes | ||
| IP Rating | IP65 | ||
| PV String Input Data | |||
| MPPT Efficiency | >99% | ||
| MPPT Voltage Range | 150-425 V | ||
| Max PV Short-Circuit Current | 60+60+60 A | ||
| Max PV Input Current | 32+32+32 A | ||
| Max PV Input Power | 19200 W | 22400 W | 25600 W |
| Max PV Array Power | 24000 W | 28000 W | 32000 W |
| MPPT Nominal Voltage | 370 V | ||
| Start-up Voltage | 125 V | ||
| Mechanical Data | |||
| Type of Cooling | Intelligent Air Cooling | ||
| Cooling Method | Intelligent Air Cooling | ||
| Operating Conditions | |||
| Noise Level | <50 dB | ||
| Max Altitude | 2000m | ||
| Relative Humidity | 0-100% | ||
| Operating Temperature | -40 to 60 °C | ||
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in Yemen
| Market | Yemen |
| Grid authority / regulator | Public Electricity Corporation (PEC), Ministry of Electricity and Energy |
| Quotation currency | YER |
| Support hours timezone | Asia/Aden |
| Delivery & installation coverage | Sana'a, Aden, Taiz, Al Hudaydah, Mukalla |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Yemen that is Public Electricity Corporation (PEC), Ministry of Electricity and Energy. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- 290A Charging: Ultra-high power charging
- Dual Battery Inputs: 2 battery connections
- Touch LCD Display: Colorful intuitive interface
- 16 Units Parallel: Scale up to 192kW
- AC Coupling: Retrofit existing systems
- 6 Time Periods: Advanced battery management
Frequently Asked Questions
Is the DEYE SUN-12K-SG01LP1-EU suitable for the Middle East climate?
Yes. DEYE inverters are rated for high ambient temperatures and dusty conditions common across the Gulf, North Africa and the wider MEA region, with IP-rated enclosures for outdoor installation in shaded areas.
Why dual battery inputs?
Dual battery inputs allow you to connect two separate battery banks for increased capacity and flexibility, enabling larger energy storage systems.
What is the maximum PV input?
The SUN-12K supports 24kW, SUN-14K supports 28kW, and SUN-16K supports up to 32kW of PV access power, allowing for very high DC/AC ratios.