Deye WD-G12100 / DEYE-WD-G12200
1.28 kWh 12V modular battery with 100A discharge and universal inverter compatibility.
Technical Specifications
| Parameter | DEYE-WD-G12100 | DEYE-WD-G12200 |
|---|---|---|
| Additional Specifications | ||
| Certification | UN38.3, MSDS | |
| LED Indicator | LED (SOC,working | |
| Scalability | Max. 4 units in series ( | |
| Recommend Depth of Discharge | 80% | |
| Peak Charge (10s) | 200 A | |
| Peak Discharge (10s) | 200 A | |
| Max Continuous Charge | 200 A | |
| Peak Charge | 300 A | |
| Max Continuous Discharge | 200 A | |
| Peak Discharge | 300 A | |
| Electrical / AC Output Data | ||
| Charge Max. Continuous (A) | 100 | 200 |
| Discharge Max. Continuous (A) | 100 | 200 |
| Operating Voltage Range | 11.2~14.6 | |
| Nominal Energy (kWh)* | 1.28 | 2.56 |
| Nominal Voltage | 12.8 V | |
| Max Parallel Units | 10 units | |
| Electrical Data | ||
| Nominal Voltage (V) | 12.8 | |
| Operating Voltage | 11.2~14.6 V | |
| Battery Data | ||
| Battery Type / Chemistry | LiFePO₄ | |
| Charge Max. Continuous | 100 A | 200 A |
| Cycle Life | ≥6000 | |
| Nominal Capacity | 100 Ah | 200 Ah |
| Cell / Pack Configuration | Prismatic, 1P4S | Prismatic, 2P4S |
| Max Series Units | 4 units (51.2V) | |
| Max Charge Current | 100 A | |
| Max Discharge Current | 100 A | |
| Recommended DoD | 80% | |
| Mechanical Data | ||
| Installation / Mounting | Stack-Mounted, Floor-Mounted | |
| Container / Case Material | ABS + PC | PC+ABS |
| Protection Features | ||
| IP Rating | IP20 | |
| Communication | ||
| Communication Interface | RS485 | |
| Operating Conditions | ||
| Max Altitude | ≤2000m | |
| Operating Temperature | Discharge: -20℃～55℃ | |
| Relative Humidity | 0 ~ 95 | |
| Storage Temperature Range | 0～35℃ | |
| Charging Temperature Range | 0 to 55 °C | |
| Discharging Temperature Range | -20 to 55 °C | |
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in Yemen
| Market | Yemen |
| Grid authority / regulator | Public Electricity Corporation (PEC), Ministry of Electricity and Energy |
| Quotation currency | YER |
| Support hours timezone | Asia/Aden |
| Delivery & installation coverage | Sana'a, Aden, Taiz, Al Hudaydah, Mukalla |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Yemen that is Public Electricity Corporation (PEC), Ministry of Electricity and Energy. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- 12V System: Universal inverter compatibility
- 200A Peak Current: High power capability
- Flexible Config: Series to 51.2V, parallel to 10 units
- Intelligent BMS: Built-in protection and monitoring
- LED Indicators: SOC and status display
- Easy Maintenance: External power recharging support
- 300A Peak Current: High power capability
- Firmware Updates: RS485 firmware upgrade support
Frequently Asked Questions
Is the DEYE WD-G12100 suitable for hot climates like the Gulf?
Yes. The WD-G12100 uses LiFePO4 chemistry with a BMS and thermal management designed to operate safely in the high ambient temperatures common across the Middle East and Africa.
Can I use this with any inverter?
Yes! The WD-G12100 is designed for wide application and works with any brand inverter, making it perfect for backup power and residential systems.
How can I expand the system?
You can connect up to 4 units in series (reaching 51.2V) and up to 10 units in parallel, allowing flexible system configurations to meet your energy needs.
Is the DEYE WD-G12200 suitable for hot climates like the Gulf?
Yes. The WD-G12200 uses LiFePO4 chemistry with a BMS and thermal management designed to operate safely in the high ambient temperatures common across the Middle East and Africa.
How does this compare to the WD-G12100?
The WD-G12200 offers double the capacity (200Ah vs 100Ah, 2.56kWh vs 1.28kWh) and higher current capability (200A continuous vs 100A) for more demanding applications.
What is the maximum system configuration?
You can connect up to 4 units in series (reaching 51.2V) and up to 10 units in parallel, allowing for flexible system configurations up to 102.4 kWh.