Deye RW-F10.2-B

10.24kWh scalable home battery with auto-networking, 1C charge/1.25C discharge, and IP65 protection.

Models Covered: RW-F10.2-B

Manufacturer: Ningbo Deye Technology Co., Ltd. (Stock Code: 605117.SH)

Application: The Deye RW-F10.2-B is a scalable home battery storage system for North America. Featuring LiFePO₄ chemistry, 10.24kWh nominal energy, 200Ah capacity, 51.2V nominal voltage, 43.2-57.6V operating range, auto-networking modules (no DIP switch), max 32 packs in parallel (327kWh max), 1C charge/1.25C discharge capability, intelligent BMS, flat wall-mountable or floor-standing design, IP65 protection, and operation from -20°C to 55°C, it's the convenient and safe choice for residential energy storage.

Download PDF Datasheet WhatsApp Us

Technical Specifications

Parameter RW-F10.2-B
Electrical / AC Output Data
Max Parallel Units 32 (327kWh)
Nominal Voltage 51.2 V
Operating Voltage Range 44.8~57.6 V
Status Indicator LED(SOC:20%~SOC100% and working state)
Battery Data
Battery Energy Capacity 10.24 kWh
Nominal Capacity 200 Ah
Battery Type / Chemistry LiFePO4
Cycle Life ≥6,000 cycles
End-of-Life Capacity 70%
Max Charge Rate (C) 1C
Max Discharge Rate (C) 1.25C
Recommended Charge/Discharge Current 100 A
Recommended DoD 90%
Protection Features
IP Rating IP65
Mechanical Data
Installation / Mounting Wall or Floor
Operating Conditions
Operating Temperature -20 to 55 °C
Relative Humidity 5%~95%
Storage Temperature Range 32 °C – 95 °C

Note: Specifications are based on the official Deye RW-F10.2-B datasheet. Values may be subject to change; always verify against the latest manufacturer documentation before system design and procurement.

Availability & grid compliance in Spain

Market Spain
Grid authority / regulator CNMC Spain
Quotation currency EUR
Support hours timezone Europe/Madrid
Delivery & installation coverage Madrid, Barcelona, Valencia, Seville

Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Spain that is CNMC Spain. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.

Key Features & Technical Highlights

  • 10.24kWh Capacity: Scalable to 327kWh
  • Auto-Networking: No DIP switch needed
  • 1.25C Discharge: High power capability
  • IP65 Protection: Indoor/outdoor rated
  • Remote Monitoring: Deye app support
  • Flexible Install: Wall or floor mounting

Frequently Asked Questions

What inverters is the DEYE RW-F10.2-B compatible with?

The RW-F10.2-B pairs with DEYE hybrid and off-grid inverters and most 48V-architecture inverters that support its battery type setting. Confirm the inverter's battery-type (Batt-V) configuration matches before installation.

Is the DEYE RW-F10.2-B suitable for hot climates like the Gulf?

Yes. The RW-F10.2-B uses LiFePO4 chemistry with a BMS and thermal management designed to operate safely in the high ambient temperatures common across the Middle East and Africa.

How many modules can I connect?

The RW-F10.2-B supports up to 32 packs in parallel, providing a maximum capacity of 327kWh for large residential or small commercial applications.

What is auto-networking?

Auto-networking means the battery modules automatically connect and configure themselves without needing manual DIP switch coding, making installation and expansion much simpler.