Deye RW-F16
A 16 kWh indoor LiFePO4 battery built on 314 Ah cells, delivering 8 kW of rated power with 90% round-trip efficiency and expansion to a stated 512 kWh.
Technical Specifications
| Parameter | DEYE-RW-F16 |
|---|---|
| Battery Data | |
| Energy | 16 kWh |
| Usable Energy | 14.4 kWh |
| Max. Capacity | 512 kWh |
| Nominal Voltage | 51.2 V |
| Operating Voltage | 44.8-57.6 V |
| Rated Capacity | 314 Ah |
| Cell Chemistry | LiFePO4 |
| Cycle Life | >6000 |
| End-of-Life Capacity | 70% |
| Energy Throughput | 26.25/52.5 MWh |
| Recommended Depth of Discharge | 90% |
| Rated DC Power | 8 kW |
| Max. Charge Current | 160 A |
| Max. Discharge Current | 160 A |
| Max. Charge/Discharge Current | 160 A |
| Peak Discharge Current | 300 (10s) A |
| Max. Round-Trip Efficiency | 90% |
| Min. Battery Module Quantity | 1 |
| Parallel Units | 32 |
| Built-in Circuit Breaker | 125A 2P, 60Vdc |
| Warranty (Years) | 10 |
| Mechanical & Interface | |
| Communication Ports | CAN2.0, RS485 |
| Dimensions | 480 x 830 x 235 mm |
| Additional Notes | Peak charge current 300 (10s) |
| Status Indicator | LED (SOC and working state) |
| Weight | 122 kg |
| Environment & Protection | |
| Altitude | <2000 m |
| Charge Temperature | 0-55 °C |
| Discharge Temperature | -20 to 55 °C |
| Operating Humidity | 0-95% |
| Installation Location | Wall-Mounted, Floor-Mounted |
| Enclosure IP Rating | IP20 |
| Storage Temperature | 0-35 °C |
| Working Temperature | 15-35 °C |
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in Iraq
| Market | Iraq |
| Grid authority / regulator | Ministry of Electricity Iraq |
| Quotation currency | IQD |
| Support hours timezone | Asia/Baghdad |
| Delivery & installation coverage | Baghdad, Basra, Erbil, Mosul |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Iraq that is Ministry of Electricity Iraq. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- 16 kWh from 314 Ah cells: High-capacity 314 Ah LiFePO4 cells at 51.2 V deliver 16 kWh, with 14.4 kWh usable at 90% depth of discharge.
- 300 A ten-second peak: Sustains 160 A continuously at 8 kW of rated power and absorbs 300 A surges for 10 seconds.
- 90% round-trip efficiency: Returns 90% of the energy stored in it, across a life beyond 6,000 cycles to 70% end-of-life.
- Indoor wall or floor unit: The IP20-rated, 122 kg unit at 480 x 830 x 235 mm mounts on an indoor wall or floor.
- Expands to 512 kWh: Thirty-two units in parallel reach a stated maximum capacity of 512 kWh.
- Certified with breaker built in: UN38.3 and MSDS certified, with a built-in 125 A two-pole circuit breaker at 60 Vdc.
Frequently Asked Questions
What voltage class is the RW-F16 and what pairs with it?
Nominally 51.2 V and operating between 44.8 and 57.6 V, it communicates over CAN2.0 and RS485 - the profile of a low-voltage hybrid inverter companion.
Can the RW-F16 go outside?
No - its enclosure is rated IP20, so it needs an indoor location; the unit works best between 15 and 35 degrees C, charging at 0-55 and discharging at -20 to 55 degrees C.
How much surge can the RW-F16 absorb?
Beyond its 160 A continuous rating, it handles a peak discharge of 300 A for 10 seconds - headroom for motor and compressor starts.
What warranty does the RW-F16 state?
The stated warranty term is 10 years, alongside a rated energy throughput of 26.25/52.5 MWh and a cycle life above 6,000 cycles.
How big can an RW-F16 bank become?
Up to 32 units connect in parallel, with a stated maximum capacity of 512 kWh - enough scope for a small business to keep growing.