Deye RW-F16
A 16 kWh indoor LiFePO4 battery built on 314 Ah cells, delivering 8 kW of rated power with 90% round-trip efficiency and expansion to a stated 512 kWh.
Technical Specifications
| Parameter | DEYE-RW-F16 |
|---|---|
| Battery Data | |
| Energy | 16 kWh |
| Usable Energy | 14.4 kWh |
| Max. Capacity | 512 kWh |
| Nominal Voltage | 51.2 V |
| Operating Voltage | 44.8-57.6 V |
| Rated Capacity | 314 Ah |
| Cell Chemistry | LiFePO4 |
| Cycle Life | >6000 |
| End-of-Life Capacity | 70% |
| Energy Throughput | 26.25/52.5 MWh |
| Recommended Depth of Discharge | 90% |
| Rated DC Power | 8 kW |
| Max. Charge Current | 160 A |
| Max. Discharge Current | 160 A |
| Max. Charge/Discharge Current | 160 A |
| Peak Discharge Current | 300 (10s) A |
| Max. Round-Trip Efficiency | 90% |
| Min. Battery Module Quantity | 1 |
| Parallel Units | 32 |
| Built-in Circuit Breaker | 125A 2P, 60Vdc |
| Warranty (Years) | 10 |
| Mechanical & Interface | |
| Communication Ports | CAN2.0, RS485 |
| Dimensions | 480 x 830 x 235 mm |
| Additional Notes | Peak charge current 300 (10s) |
| Status Indicator | LED (SOC and working state) |
| Weight | 122 kg |
| Environment & Protection | |
| Altitude | <2000 m |
| Charge Temperature | 0-55 °C |
| Discharge Temperature | -20 to 55 °C |
| Operating Humidity | 0-95% |
| Installation Location | Wall-Mounted, Floor-Mounted |
| Enclosure IP Rating | IP20 |
| Storage Temperature | 0-35 °C |
| Working Temperature | 15-35 °C |
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in Sudan
| Market | Sudan |
| Grid authority / regulator | Sudanese Electricity Distribution Company (SEDC), Ministry of Energy and Petroleum |
| Quotation currency | SDG |
| Support hours timezone | Africa/Khartoum |
| Delivery & installation coverage | Khartoum, Omdurman, Port Sudan, Kassala, Nyala |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Sudan that is Sudanese Electricity Distribution Company (SEDC), Ministry of Energy and Petroleum. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- 16 kWh from 314 Ah cells: High-capacity 314 Ah LiFePO4 cells at 51.2 V deliver 16 kWh, with 14.4 kWh usable at 90% depth of discharge.
- 300 A ten-second peak: Sustains 160 A continuously at 8 kW of rated power and absorbs 300 A surges for 10 seconds.
- 90% round-trip efficiency: Returns 90% of the energy stored in it, across a life beyond 6,000 cycles to 70% end-of-life.
- Indoor wall or floor unit: The IP20-rated, 122 kg unit at 480 x 830 x 235 mm mounts on an indoor wall or floor.
- Expands to 512 kWh: Thirty-two units in parallel reach a stated maximum capacity of 512 kWh.
- Certified with breaker built in: UN38.3 and MSDS certified, with a built-in 125 A two-pole circuit breaker at 60 Vdc.
Frequently Asked Questions
What voltage class is the RW-F16 and what pairs with it?
Nominally 51.2 V and operating between 44.8 and 57.6 V, it communicates over CAN2.0 and RS485 - the profile of a low-voltage hybrid inverter companion.
Can the RW-F16 go outside?
No - its enclosure is rated IP20, so it needs an indoor location; the unit works best between 15 and 35 degrees C, charging at 0-55 and discharging at -20 to 55 degrees C.
How much surge can the RW-F16 absorb?
Beyond its 160 A continuous rating, it handles a peak discharge of 300 A for 10 seconds - headroom for motor and compressor starts.
What warranty does the RW-F16 state?
The stated warranty term is 10 years, alongside a rated energy throughput of 26.25/52.5 MWh and a cycle life above 6,000 cycles.
How big can an RW-F16 bank become?
Up to 32 units connect in parallel, with a stated maximum capacity of 512 kWh - enough scope for a small business to keep growing.