Deye RW-L2.5A
A compact 25.6 V LiFePO4 battery holding 2.56 kWh with 2.3 kWh usable, sealed to IP65 and light enough at 32 kg for one-room and small-system storage.
Technical Specifications
| Parameter | DEYE-RW-L2.5A |
|---|---|
| Battery Data | |
| Energy | 2.56 kWh |
| Usable Energy | 2.3 kWh |
| Max. Capacity | 81.92 kWh |
| Nominal Voltage | 25.6 V |
| System Nominal Voltage | 25.6 V |
| Operating Voltage | 22.4-28.8 V |
| Rated Capacity | 100 Ah |
| Cell Chemistry | LiFePO4 |
| Cycle Life | >6000 |
| Energy Throughput | 4 MWh |
| Recommended Depth of Discharge | 90% |
| Min. Battery Module Quantity | 1 |
| Parallel Units | 32 |
| Mechanical & Interface | |
| Communication Ports | CAN2.0, RS485 |
| Dimensions | 350 x 680 x 160 mm |
| Status Indicator | LCD (SOC and working state) |
| Weight | 32 kg |
| Environment & Protection | |
| Altitude | <2000 m |
| Operating Humidity | 0-95% |
| Installation Location | Wall-Mounted, Floor-Mounted |
| Enclosure IP Rating | IP65 |
| Storage Temperature | 0-35 °C |
| Working Temperature | -20 to 55 °C |
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in Netherlands
| Market | Netherlands |
| Grid authority / regulator | ACM Netherlands |
| Quotation currency | EUR |
| Support hours timezone | Europe/Amsterdam |
| Delivery & installation coverage | Amsterdam, Rotterdam, The Hague, Utrecht |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Netherlands that is ACM Netherlands. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- 2.3 kWh usable energy: 100 Ah LiFePO4 cells at 25.6 V store 2.56 kWh, with 2.3 kWh usable at 90% depth of discharge.
- One-person 32 kg install: At 32 kg and 350 x 680 x 160 mm, a single installer mounts it on wall or floor.
- IP65-sealed compact shell: Dust-tight and water-jet-resistant for placement in rough corners and semi-exposed spots.
- -20 to 55 °C operation: Works across -20 to 55 degrees C at up to 95% humidity, below 2,000 m altitude.
- LCD status readout: An LCD reports state of charge and working status directly on the unit.
- Stacks to 81.92 kWh: Up to 32 units parallel toward a stated maximum capacity of 81.92 kWh.
Frequently Asked Questions
What voltage system does the RW-L2.5A fit?
It is a 25.6 V nominal battery operating between 22.4 and 28.8 V, so it belongs with equipment designed for a 25.6 V battery bank - not with 48 V-class or high-voltage systems.
How small a load justifies the RW-L2.5A?
With 2.3 kWh usable from its 2.56 kWh capacity, it suits cabins, kiosks and single-room circuits where a larger unit would sit mostly idle.
Can the RW-L2.5A handle harsh spots?
Its IP65 shell seals out dust and water jets, and it operates from -20 to 55 degrees C at humidity up to 95%.
Does the RW-L2.5A scale up?
Yes - up to 32 units connect in parallel, with a stated maximum capacity of 81.92 kWh.
How does the RW-L2.5A connect and report?
CAN2.0 and RS485 ports carry inverter communication, while the built-in LCD shows state of charge and working status.