Deye RW-L2.5A
A compact 25.6 V LiFePO4 battery holding 2.56 kWh with 2.3 kWh usable, sealed to IP65 and light enough at 32 kg for one-room and small-system storage.
Technical Specifications
| Parameter | DEYE-RW-L2.5A |
|---|---|
| Battery Data | |
| Energy | 2.56 kWh |
| Usable Energy | 2.3 kWh |
| Max. Capacity | 81.92 kWh |
| Nominal Voltage | 25.6 V |
| System Nominal Voltage | 25.6 V |
| Operating Voltage | 22.4-28.8 V |
| Rated Capacity | 100 Ah |
| Cell Chemistry | LiFePO4 |
| Cycle Life | >6000 |
| Energy Throughput | 4 MWh |
| Recommended Depth of Discharge | 90% |
| Min. Battery Module Quantity | 1 |
| Parallel Units | 32 |
| Mechanical & Interface | |
| Communication Ports | CAN2.0, RS485 |
| Dimensions | 350 x 680 x 160 mm |
| Status Indicator | LCD (SOC and working state) |
| Weight | 32 kg |
| Environment & Protection | |
| Altitude | <2000 m |
| Operating Humidity | 0-95% |
| Installation Location | Wall-Mounted, Floor-Mounted |
| Enclosure IP Rating | IP65 |
| Storage Temperature | 0-35 °C |
| Working Temperature | -20 to 55 °C |
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in Sudan
| Market | Sudan |
| Grid authority / regulator | Sudanese Electricity Distribution Company (SEDC), Ministry of Energy and Petroleum |
| Quotation currency | SDG |
| Support hours timezone | Africa/Khartoum |
| Delivery & installation coverage | Khartoum, Omdurman, Port Sudan, Kassala, Nyala |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Sudan that is Sudanese Electricity Distribution Company (SEDC), Ministry of Energy and Petroleum. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- 2.3 kWh usable energy: 100 Ah LiFePO4 cells at 25.6 V store 2.56 kWh, with 2.3 kWh usable at 90% depth of discharge.
- One-person 32 kg install: At 32 kg and 350 x 680 x 160 mm, a single installer mounts it on wall or floor.
- IP65-sealed compact shell: Dust-tight and water-jet-resistant for placement in rough corners and semi-exposed spots.
- -20 to 55 °C operation: Works across -20 to 55 degrees C at up to 95% humidity, below 2,000 m altitude.
- LCD status readout: An LCD reports state of charge and working status directly on the unit.
- Stacks to 81.92 kWh: Up to 32 units parallel toward a stated maximum capacity of 81.92 kWh.
Frequently Asked Questions
What voltage system does the RW-L2.5A fit?
It is a 25.6 V nominal battery operating between 22.4 and 28.8 V, so it belongs with equipment designed for a 25.6 V battery bank - not with 48 V-class or high-voltage systems.
How small a load justifies the RW-L2.5A?
With 2.3 kWh usable from its 2.56 kWh capacity, it suits cabins, kiosks and single-room circuits where a larger unit would sit mostly idle.
Can the RW-L2.5A handle harsh spots?
Its IP65 shell seals out dust and water jets, and it operates from -20 to 55 degrees C at humidity up to 95%.
Does the RW-L2.5A scale up?
Yes - up to 32 units connect in parallel, with a stated maximum capacity of 81.92 kWh.
How does the RW-L2.5A connect and report?
CAN2.0 and RS485 ports carry inverter communication, while the built-in LCD shows state of charge and working status.