Deye

Deye GB-L-PRO

A floor-standing high-voltage stack of 4 kWh, 102.4 V modules reaching 8 to 24 kWh, IP65-sealed with explosion relief and fire protection built in.

Models Covered: DEYE-GB-L-PRO

Manufacturer: Ningbo Deye Inverter Technology Co., Ltd

Application: Power the house through the evening and sleep on the safety engineering. The Deye GB-L Pro stacks 4 kWh modules that each carry 102.4 V, so just two to six of them build a high-voltage system of 8 to 24 kWh, 7.2 to 21.6 kWh usable at the recommended 90% depth of discharge, sitting between 204.8 and 614.4 V nominal. Every module weighs 39 kg, and the finished tower occupies only 540 x 1530 x 385 mm of floor. Protection is layered: explosion relief and fire protection are engineered in, the IP65 enclosure keeps weather out, and an anti-corrosion grade above C2 suits salty coastal air. Charging is rated from -20 to 55 degrees C, current runs at 40 A with a 50 A, 120-second discharge peak, and an LCD reads out state of charge, power and total voltage. Firmware arrives as remote updates over CAN2.0 or RS485, certification spans CE, IEC 62619, VDE 2510-50 and UN38.3, and the warranty holds for 10 years.

Download PDF Datasheet WhatsApp Us

Technical Specifications

Parameter DEYE-GB-L-PRO
Battery Data
Energy 4 kWh
Usable Energy 7.2-21.6 kWh
Module Energy 4 kWh
System Energy 8-24 kWh
Nominal Voltage 102.4 V
Module Nominal Voltage 102.4 V
System Nominal Voltage 204.8-614.4 V
Operating Voltage 166.4-700.8 V
Rated Capacity 40 Ah
Module Capacity 40 Ah
Cell Chemistry LiFePO4
Cycle Life >6000
End-of-Life Capacity 70%
Recommended Depth of Discharge 90%
Max. Charge Current 40 A
Max. Discharge Current 40 A
Max. Charge/Discharge Current 40 A
Nominal Charge/Discharge Current 40 A
Recommended Charge/Discharge Current 20 A
Peak Discharge Current 50 (120s) A
Modules in Series 2-6
Min. Battery Module Quantity 2
Battery Module Models GB-L8-Pro, GB-L12-Pro, GB-L16-Pro, GB-L20-Pro, GB-L24-Pro
Protection Features Explosion Relief, Fire Protection
Warranty (Years) 10
Mechanical & Interface
Communication Ports CAN2.0, RS485
Dimensions 540 x 1530 x 385 mm
Additional Notes Remote Updates
Module Dimensions 540 x 220 x 385 mm
Module Weight 39 kg
Status Indicator LCD: SOC, Power, Total Voltage
Weight 97-253 kg
Environment & Protection
Altitude <2000 m
Anti-Corrosion Grade >C2
Charge Temperature -20 to 55 °C
Discharge Temperature -20 to 55 °C
Operating Humidity 5-90%
Installation Location Floor-Mounted
Enclosure IP Rating IP65
Storage Temperature 0-35 °C
Working Temperature Charge: -20 to 55 / Discharge: -20 to 55 °C

Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.

Availability & grid compliance in Sudan

Market Sudan
Grid authority / regulator Sudanese Electricity Distribution Company (SEDC), Ministry of Energy and Petroleum
Quotation currency SDG
Support hours timezone Africa/Khartoum
Delivery & installation coverage Khartoum, Omdurman, Port Sudan, Kassala, Nyala

Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Sudan that is Sudanese Electricity Distribution Company (SEDC), Ministry of Energy and Petroleum. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.

Key Features & Technical Highlights

  • 102.4 V in every module: Each 4 kWh module supplies 102.4 V, so two to six build 8 to 24 kWh at 204.8 to 614.4 V.
  • Explosion relief built in: Explosion relief and fire protection are part of the pack design, not accessories.
  • Skin graded for coasts: An anti-corrosion rating above C2 plus IP65 sealing stand up to humid, salty air.
  • Charges at -20 degrees C: Both charge and discharge are rated across the -20 to 55 degrees C range.
  • Updates without a visit: Remote firmware updates arrive over the CAN2.0 and RS485 links.
  • A six-thousand-cycle core: LiFePO4 cells keep 70% capacity beyond 6,000 cycles, warranted 10 years.

Frequently Asked Questions

Why does the GB-L Pro need so few modules?

Because each module contributes 102.4 V and 4 kWh, two to six of them already form a 204.8 to 614.4 V system holding 8 to 24 kWh.

What safety hardware does the GB-L Pro carry?

Explosion relief and fire protection are engineered into the pack, complemented by an IP65 enclosure and an anti-corrosion grade above C2.

Is the GB-L Pro suitable near the sea?

Its corrosion resistance is graded above C2 and the housing is IP65-sealed, which is exactly the specification coastal humidity calls for.

What does the GB-L Pro display and report?

A front LCD shows state of charge, power and total voltage, while CAN2.0 and RS485 carry data, and remote updates, to the inverter side.

What are the GB-L Pro weight and current figures?

Modules weigh 39 kg each and towers 97 to 253 kg; current is 40 A continuous with a 50 A peak sustained for 120 seconds, 20 A being recommended.