Deye SE-G10.2
10.24 kWh Low Voltage LiFePO4 Battery with 6000+ cycle life and modular design.
Technical Specifications
| Parameter | DEYE-SE-G10.2 |
|---|---|
| Additional Specifications | |
| Usable Energy | 8.19 kWh |
| Communication Port | CAN2.0, RS485 |
| Nominal Energy (kWh)!!! | 10.24 |
| Operating Voltage | 44.8~57.6 V |
| Overvoltage protection | greater than 3.65 V state. charging The battery voltage in is are not consistent. Cells The of some cells capacity deteriorates protection against abnormality; too fast or the internal resistance of contact local; greater than 58.4 V. some cells is too high. engineers to rectify; the fault.; The mains power failure has lasted; The battery voltage is for a long time. |
| Recommend Depth of Discharge | 90% DoD |
| IP Rating of enclosure | IP20; Charge:0°C~55°C |
| Mounting Options | Floor/Wall/Rack |
| Battery Data | |
| Battery Type / Chemistry | LiFePO₄ |
| Max Charge/Discharge Current | 100 |
| Nominal Capacity | 200 Ah |
| Max Charge Current | 100A (200A peak) |
| Max Discharge Current | 100A (200A peak) |
| Recommended DoD | 80% |
| Protection Features | |
| Certification / Compliance Safety | UN38.3,MSDS |
| IP Rating | IP20 |
| Electrical / AC Output Data | |
| Status Indicator | 3LED (working, alarming, protecting) |
| Nominal Voltage | 51.2 V |
| Operating Voltage Range | 44.8-57.6 V |
| Mechanical Data | |
| Installation / Mounting | ( cabinet depth ≥600mm ) |
| Communication | |
| Communication Interface | CAN2.0, RS485 |
| Operating Conditions | |
| Max Altitude | ≤2000m |
| Relative Humidity | 0 ~ 95 |
| Storage Temperature Range | 0℃~35℃ |
| Operating Temperature | Discharge:-20℃~55℃ |
| Charging Temperature Range | 0 to 55 °C |
| Discharging Temperature Range | -20 to 55 °C |
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in Sudan
| Market | Sudan |
| Grid authority / regulator | Sudanese Electricity Distribution Company (SEDC), Ministry of Energy and Petroleum |
| Quotation currency | SDG |
| Support hours timezone | Africa/Khartoum |
| Delivery & installation coverage | Khartoum, Omdurman, Port Sudan, Kassala, Nyala |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Sudan that is Sudanese Electricity Distribution Company (SEDC), Ministry of Energy and Petroleum. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- 10.24 kWh Capacity: 200Ah high capacity for larger energy needs
- Scalable to 655 kWh: Connect up to 64 units in parallel for commercial installations
- 6000+ Cycle Life: Long-lasting cobalt-free LiFePO4 chemistry
- Safe & Eco-Friendly: Non-toxic, pollution-free materials with no thermal runaway risk
- Wide Temperature Range: Operates from -20°C to 55°C for various climates
- Auto Networking: Remote monitoring and firmware upgrade support
Frequently Asked Questions
What's the difference between SE-G5.1 and SE-G10.2?
The SE-G10.2 has double the capacity (10.24 kWh vs 5.12 kWh) and double the nominal capacity (200Ah vs 100Ah). It's ideal for larger homes or small commercial applications that need more energy storage per unit.
How many SE-G10.2 units can I connect together?
You can connect up to 64 SE-G10.2 units in parallel, providing a maximum storage capacity of 655 kWh. This makes it suitable for large residential and commercial installations.
Is the SE-G10.2 safe for indoor installation?
Yes, the SE-G10.2 uses cobalt-free LiFePO4 chemistry which is inherently safer than other lithium batteries. It has no thermal runaway risk and uses non-toxic, pollution-free materials.
What certifications does the SE-G10.2 have?
The SE-G10.2 is certified with CE, CB, UN38.3, and IEC 62619 standards, ensuring it meets international safety and quality requirements.