This model in each market

Systems that use this model:Solar system for a house with evening backup powerSolar system for a shop with evening backup power

DEYE SE-G10.2 Lithium Iron Phosphate Battery

Deye 10.24 kWh 51.2 V Lithium Solar Battery SE-G10.2

A 10.24 kWh, 51.2 V module built for racking: 2P16S architecture, 0.5C operation, a 200 A ten-second peak and parallel expansion across as many as 64 units.

Authorised Deye distributor for the Middle East — certificate No. GFKFLFI1.

  • Energy: 10.24 kWh
  • Usable Energy: 8.19 kWh
  • Nominal Voltage: 51.2 V
  • Cycle Life: >6000
AED 4,800incl. VAT

In stock

Or collect it yourself — no carriage

Deye 10.24 kWh 51.2 V Lithium Solar Battery SE-G10.2 features

Double capacity per slot

10.24 kWh per module from a 2P16S LiFePO4 configuration, with 8.19 kWh usable at the recommended 80% depth of discharge.

Made for cabinets

Racks into cabinets deeper than 600 mm, and also wall-mounts or floor-stacks; the module measures 710 x 133 x 540 mm.

Steady 0.5C operation

100 A of charge and discharge with a 200 A peak held for 10 seconds.

Stated 655 kWh ceiling

Up to 64 modules parallel into one bank - 32 without a CAN-Box.

Breaker plus BMS

A built-in circuit breaker complements BMS protection.

Status at a glance

Five SOC LEDs and three working, alarming and protecting LEDs, with CAN2.0 and RS485 ports.

About the Deye 10.24 kWh 51.2 V Lithium Solar Battery SE-G10.2

Commercial plant rooms are built in rows, and the Deye SE-G10.2 is shaped for them: a 710 x 133 x 540 mm module holding 10.24 kWh in a 2P16S LiFePO4 configuration, ready for wall mounting, stacked floor mounting or racking in cabinets deeper than 600 mm. Each unit charges and discharges at up to 100 A (0.5C), with a 200 A ten-second peak, and delivers 8.19 kWh at the recommended 80% depth of discharge. Where the SE-G10.2 stands apart is scale: up to 64 modules in parallel - 32 without a CAN-Box - for a stated maximum of 655 kWh at 51.2 V. Cycle life exceeds 6,000 cycles to 70% capacity, and a built-in circuit breaker sits alongside the BMS. Five SOC LEDs plus three status LEDs make state readable at a glance, CAN2.0 and RS485 handle inverter communication, and the 85 kg module carries a stated 10-year warranty. We are an authorised Deye distributor and supply the SE-G10.2 from our own stock, with technical support before and after the sale.

Specifications last updated 24 January 2026

Deye 10.24 kWh 51.2 V Lithium Solar Battery SE-G10.2 is best for

  • Rack-based commercial and plant-room installations
  • Banks scaling toward a stated 655 kWh
  • 51.2 V low-voltage inverter systems
  • Indoor, climate-protected battery rooms

Deye 10.24 kWh 51.2 V Lithium Solar Battery SE-G10.2 is not for

  • Outdoor or damp locations (IP20)
  • Sites above 2,000 m
  • Battery inverters of the high-voltage class
  • Sub-zero charging (0 degrees Celsius minimum)

Deye 10.24 kWh 51.2 V Lithium Solar Battery SE-G10.2 full specifications

Electrical

Energy10.24 kWh
Usable Energy8.19 kWh
Max. Capacity655 kWh
Nominal Voltage51.2 V
Operating Voltage44.8-57.6 V
Rated Capacity200 Ah
Cell ChemistryLiFePO4
Pack Configuration2P16S
Cycle Life>6000
End-of-Life Capacity70 %
Recommended Depth of Discharge80 %
Max. Charge Rate0.5C
Max. Discharge Rate0.5C
Max. Charge Current100 A
Max. Discharge Current100 A
Max. Charge/Discharge Current100 A
Peak Discharge Current200 (10s) A
Min. Battery Module Quantity1
Parallel Units64
Built-in Circuit BreakerCircuit Breaker
Protection FeaturesBMS Protection
Warranty (Years)10

Mechanical

Communication PortsCAN2.0, RS485
Dimensions710 x 133 x 540 mm
Additional NotesRequires cabinet depth >600 mm; Cell overvoltage threshold 3.65 V (truncated source text); Peak charge current mirrors peak discharge (10s); max 32 pcs parallel without CAN-Box
Status Indicator5LED (SOC 20%-100%), 3LED (working, alarming, protecting)
Weight85 kg

Environmental

Altitude<2000 m
Charge Temperature0-55 °C
Discharge Temperature-20 to 55 °C
Operating Humidity0-95 %
Installation LocationWall-Mounted, Floor-Mounted (stacked), Rack-Mounted (cabinet depth >600mm)
Enclosure IP RatingIP20
Storage Temperature0-35 °C
Working TemperatureCharge: 0-55 / Discharge: -20 to 55 °C

Certifications

  • UN38.3
  • MSDS