Deye Solar Inverters & Lithium Batteries: Prices in Sudan — Authorized DistributorDeye 10.24 kWh 51.2 V Lithium Solar Battery SE-G10.2

DEYE SE-G10.2 Lithium Iron Phosphate Battery

Deye Battery 10.24 kWh Lithium 51.2 V SE-G10.2 in Sudan

A 10.24 kWh, 51.2 V module built for racking: 2P16S architecture, 0.5C operation, a 200 A ten-second peak and parallel expansion across as many as 64 units.

Authorised Deye distributor for Sudan — certificate No. GFKFLFI1.

Deye SE-G10.2, 10.24 kWh, is also searched as solar battery.

  • Energy: 10.24 kWh
  • Usable Energy: 8.19 kWh
  • Nominal Voltage: 51.2 V
  • Cycle Life: >6000

Deye battery SE-G10.2 price in Sudan: USD 1,307.

In stock

A reference price in Sudan: this market is supplied wholesale, at trade prices and quantity terms, delivered within 15 business days.

One unit:
order at this price and pay on delivery, or collect it free from one of our counters.
Installers:
trade pricing with no minimum order, out of the same stock, with this unit’s datasheet and error codes.
Projects and businesses:
we quote from one piece to five hundred, and can size the system with you before you order.

Become our retailer in your country and get wholesale pricingSize the system for this unitPre-sized systems

Or collect it yourself — no carriage

Deye Battery 10.24 kWh Lithium 51.2 V SE-G10.2 in Sudan features

Double capacity per slot

10.24 kWh per module from a 2P16S LiFePO4 configuration, with 8.19 kWh usable at the recommended 80% depth of discharge.

Made for cabinets

Racks into cabinets deeper than 600 mm, and also wall-mounts or floor-stacks; the module measures 710 x 133 x 540 mm.

Steady 0.5C operation

100 A of charge and discharge with a 200 A peak held for 10 seconds.

Stated 655 kWh ceiling

Up to 64 modules parallel into one bank - 32 without a CAN-Box.

Breaker plus BMS

A built-in circuit breaker complements BMS protection.

Status at a glance

Five SOC LEDs and three working, alarming and protecting LEDs, with CAN2.0 and RS485 ports.

About the Deye Battery 10.24 kWh Lithium 51.2 V SE-G10.2 in Sudan

Commercial plant rooms are built in rows, and the Deye SE-G10.2 is shaped for them: a 710 x 133 x 540 mm module holding 10.24 kWh in a 2P16S LiFePO4 configuration, ready for wall mounting, stacked floor mounting or racking in cabinets deeper than 600 mm. Each unit charges and discharges at up to 100 A (0.5C), with a 200 A ten-second peak, and delivers 8.19 kWh at the recommended 80% depth of discharge. Where the SE-G10.2 stands apart is scale: up to 64 modules in parallel - 32 without a CAN-Box - for a stated maximum of 655 kWh at 51.2 V. Cycle life exceeds 6,000 cycles to 70% capacity, and a built-in circuit breaker sits alongside the BMS. Five SOC LEDs plus three status LEDs make state readable at a glance, CAN2.0 and RS485 handle inverter communication, and the 85 kg module carries a stated 10-year warranty. We are an authorised Deye distributor and supply the SE-G10.2 from our own stock, with technical support before and after the sale.

Specifications last updated 24 January 2026

Deye Battery 10.24 kWh Lithium 51.2 V SE-G10.2 in Sudan is best for

  • Rack-based commercial and plant-room installations
  • Banks scaling toward a stated 655 kWh
  • 51.2 V low-voltage inverter systems
  • Indoor, climate-protected battery rooms

Deye Battery 10.24 kWh Lithium 51.2 V SE-G10.2 in Sudan is not for

  • Outdoor or damp locations (IP20)
  • Sites above 2,000 m
  • Battery inverters of the high-voltage class
  • Sub-zero charging (0 degrees Celsius minimum)

Deye Battery 10.24 kWh Lithium 51.2 V SE-G10.2 in Sudan full specifications

Electrical

Energy10.24 kWh
Usable Energy8.19 kWh
Max. Capacity655 kWh
Nominal Voltage51.2 V
Operating Voltage44.8-57.6 V
Rated Capacity200 Ah
Cell ChemistryLiFePO4
Pack Configuration2P16S
Cycle Life>6000
End-of-Life Capacity70 %
Recommended Depth of Discharge80 %
Max. Charge Rate0.5C
Max. Discharge Rate0.5C
Max. Charge Current100 A
Max. Discharge Current100 A
Max. Charge/Discharge Current100 A
Peak Discharge Current200 (10s) A
Min. Battery Module Quantity1
Parallel Units64
Built-in Circuit BreakerCircuit Breaker
Protection FeaturesBMS Protection
Warranty (Years)10

Mechanical

Communication PortsCAN2.0, RS485
Dimensions710 x 133 x 540 mm
Additional NotesRequires cabinet depth >600 mm; Cell overvoltage threshold 3.65 V (truncated source text); Peak charge current mirrors peak discharge (10s); max 32 pcs parallel without CAN-Box
Status Indicator5LED (SOC 20%-100%), 3LED (working, alarming, protecting)
Weight85 kg

Environmental

Altitude<2000 m
Charge Temperature0-55 °C
Discharge Temperature-20 to 55 °C
Operating Humidity0-95 %
Installation LocationWall-Mounted, Floor-Mounted (stacked), Rack-Mounted (cabinet depth >600mm)
Enclosure IP RatingIP20
Storage Temperature0-35 °C
Working TemperatureCharge: 0-55 / Discharge: -20 to 55 °C

Certifications

  • UN38.3
  • MSDS

Related Products