Deye

Deye SE-G10.2

A 10.24 kWh, 51.2 V module built for racking: 2P16S architecture, 0.5C operation, a 200 A ten-second peak and parallel expansion across as many as 64 units.

Models Covered: DEYE-SE-G10.2

Manufacturer: Ningbo Deye Inverter Technology Co., Ltd

Application: Commercial plant rooms are built in rows, and the Deye SE-G10.2 is shaped for them: a 710 x 133 x 540 mm module holding 10.24 kWh in a 2P16S LiFePO4 configuration, ready for wall mounting, stacked floor mounting or racking in cabinets deeper than 600 mm. Each unit charges and discharges at up to 100 A (0.5C), with a 200 A ten-second peak, and delivers 8.19 kWh at the recommended 80% depth of discharge. Where the SE-G10.2 stands apart is scale: up to 64 modules in parallel - 32 without a CAN-Box - for a stated maximum of 655 kWh at 51.2 V. Cycle life exceeds 6,000 cycles to 70% capacity, and a built-in circuit breaker sits alongside the BMS. Five SOC LEDs plus three status LEDs make state readable at a glance, CAN2.0 and RS485 handle inverter communication, and the 85 kg module carries a stated 10-year warranty.

Download PDF Datasheet WhatsApp Us

Technical Specifications

Parameter DEYE-SE-G10.2
Battery Data
Energy 10.24 kWh
Usable Energy 8.19 kWh
Max. Capacity 655 kWh
Nominal Voltage 51.2 V
Operating Voltage 44.8-57.6 V
Rated Capacity 200 Ah
Cell Chemistry LiFePO4
Pack Configuration 2P16S
Cycle Life >6000
End-of-Life Capacity 70%
Recommended Depth of Discharge 80%
Max. Charge Rate 0.5C
Max. Discharge Rate 0.5C
Max. Charge Current 100 A
Max. Discharge Current 100 A
Max. Charge/Discharge Current 100 A
Peak Discharge Current 200 (10s) A
Min. Battery Module Quantity 1
Parallel Units 64
Built-in Circuit Breaker Circuit Breaker
Protection Features BMS Protection
Warranty (Years) 10
Mechanical & Interface
Communication Ports CAN2.0, RS485
Dimensions 710 x 133 x 540 mm
Additional Notes Requires cabinet depth >600 mm; Cell overvoltage threshold 3.65 V (truncated source text); Peak charge current mirrors peak discharge (10s); max 32 pcs parallel without CAN-Box
Status Indicator 5LED (SOC 20%-100%), 3LED (working, alarming, protecting)
Weight 85 kg
Environment & Protection
Altitude <2000 m
Charge Temperature 0-55 °C
Discharge Temperature -20 to 55 °C
Operating Humidity 0-95%
Installation Location Wall-Mounted, Floor-Mounted (stacked), Rack-Mounted (cabinet depth >600mm)
Enclosure IP Rating IP20
Storage Temperature 0-35 °C
Working Temperature Charge: 0-55 / Discharge: -20 to 55 °C

Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.

Availability & grid compliance in Sudan

Market Sudan
Grid authority / regulator Sudanese Electricity Distribution Company (SEDC), Ministry of Energy and Petroleum
Quotation currency SDG
Support hours timezone Africa/Khartoum
Delivery & installation coverage Khartoum, Omdurman, Port Sudan, Kassala, Nyala

Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Sudan that is Sudanese Electricity Distribution Company (SEDC), Ministry of Energy and Petroleum. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.

Key Features & Technical Highlights

  • Double capacity per slot: 10.24 kWh per module from a 2P16S LiFePO4 configuration, with 8.19 kWh usable at the recommended 80% depth of discharge.
  • Made for cabinets: Racks into cabinets deeper than 600 mm, and also wall-mounts or floor-stacks; the module measures 710 x 133 x 540 mm.
  • Steady 0.5C operation: 100 A of charge and discharge with a 200 A peak held for 10 seconds.
  • Stated 655 kWh ceiling: Up to 64 modules parallel into one bank - 32 without a CAN-Box.
  • Breaker plus BMS: A built-in circuit breaker complements BMS protection.
  • Status at a glance: Five SOC LEDs and three working, alarming and protecting LEDs, with CAN2.0 and RS485 ports.

Frequently Asked Questions

What rack does the SE-G10.2 need?

A cabinet deeper than 600 mm; the module measures 710 x 133 x 540 mm and can alternatively be wall-mounted or floor-stacked.

How large can an SE-G10.2 system get?

Up to 64 modules in parallel - 32 without a CAN-Box - for a stated maximum of 655 kWh.

What are the current limits of the SE-G10.2?

Charge and discharge are each rated at 100 A (0.5C), with a 200 A peak for 10 seconds.

Is the SE-G10.2 suitable for high-altitude or outdoor sites?

No - the IP20 enclosure requires an indoor location, and the altitude limit is 2,000 m.

Which inverter class matches the SE-G10.2?

Low-voltage systems: 51.2 V nominal with a 44.8-57.6 V operating range, communicating over CAN2.0 or RS485.