Deye SE-G10.2
A 10.24 kWh, 51.2 V module built for racking: 2P16S architecture, 0.5C operation, a 200 A ten-second peak and parallel expansion across as many as 64 units.
Technical Specifications
| Parameter | DEYE-SE-G10.2 |
|---|---|
| Battery Data | |
| Energy | 10.24 kWh |
| Usable Energy | 8.19 kWh |
| Max. Capacity | 655 kWh |
| Nominal Voltage | 51.2 V |
| Operating Voltage | 44.8-57.6 V |
| Rated Capacity | 200 Ah |
| Cell Chemistry | LiFePO4 |
| Pack Configuration | 2P16S |
| Cycle Life | >6000 |
| End-of-Life Capacity | 70% |
| Recommended Depth of Discharge | 80% |
| Max. Charge Rate | 0.5C |
| Max. Discharge Rate | 0.5C |
| Max. Charge Current | 100 A |
| Max. Discharge Current | 100 A |
| Max. Charge/Discharge Current | 100 A |
| Peak Discharge Current | 200 (10s) A |
| Min. Battery Module Quantity | 1 |
| Parallel Units | 64 |
| Built-in Circuit Breaker | Circuit Breaker |
| Protection Features | BMS Protection |
| Warranty (Years) | 10 |
| Mechanical & Interface | |
| Communication Ports | CAN2.0, RS485 |
| Dimensions | 710 x 133 x 540 mm |
| Additional Notes | Requires cabinet depth >600 mm; Cell overvoltage threshold 3.65 V (truncated source text); Peak charge current mirrors peak discharge (10s); max 32 pcs parallel without CAN-Box |
| Status Indicator | 5LED (SOC 20%-100%), 3LED (working, alarming, protecting) |
| Weight | 85 kg |
| Environment & Protection | |
| Altitude | <2000 m |
| Charge Temperature | 0-55 °C |
| Discharge Temperature | -20 to 55 °C |
| Operating Humidity | 0-95% |
| Installation Location | Wall-Mounted, Floor-Mounted (stacked), Rack-Mounted (cabinet depth >600mm) |
| Enclosure IP Rating | IP20 |
| Storage Temperature | 0-35 °C |
| Working Temperature | Charge: 0-55 / Discharge: -20 to 55 °C |
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in Yemen
| Market | Yemen |
| Grid authority / regulator | Public Electricity Corporation (PEC), Ministry of Electricity and Energy |
| Quotation currency | YER |
| Support hours timezone | Asia/Aden |
| Delivery & installation coverage | Sana'a, Aden, Taiz, Al Hudaydah, Mukalla |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Yemen that is Public Electricity Corporation (PEC), Ministry of Electricity and Energy. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- Double capacity per slot: 10.24 kWh per module from a 2P16S LiFePO4 configuration, with 8.19 kWh usable at the recommended 80% depth of discharge.
- Made for cabinets: Racks into cabinets deeper than 600 mm, and also wall-mounts or floor-stacks; the module measures 710 x 133 x 540 mm.
- Steady 0.5C operation: 100 A of charge and discharge with a 200 A peak held for 10 seconds.
- Stated 655 kWh ceiling: Up to 64 modules parallel into one bank - 32 without a CAN-Box.
- Breaker plus BMS: A built-in circuit breaker complements BMS protection.
- Status at a glance: Five SOC LEDs and three working, alarming and protecting LEDs, with CAN2.0 and RS485 ports.
Frequently Asked Questions
What rack does the SE-G10.2 need?
A cabinet deeper than 600 mm; the module measures 710 x 133 x 540 mm and can alternatively be wall-mounted or floor-stacked.
How large can an SE-G10.2 system get?
Up to 64 modules in parallel - 32 without a CAN-Box - for a stated maximum of 655 kWh.
What are the current limits of the SE-G10.2?
Charge and discharge are each rated at 100 A (0.5C), with a 200 A peak for 10 seconds.
Is the SE-G10.2 suitable for high-altitude or outdoor sites?
No - the IP20 enclosure requires an indoor location, and the altitude limit is 2,000 m.
Which inverter class matches the SE-G10.2?
Low-voltage systems: 51.2 V nominal with a 44.8-57.6 V operating range, communicating over CAN2.0 or RS485.