Deye RW-F10.2
10.2 kWh modular battery with IP65 protection, 6000 cycles, and auto-networking.
Technical Specifications
| Parameter | DEYE-RW-F10.2 |
|---|---|
| Additional Specifications | |
| Scalability | Max. 32 pcs pack (Max. 326kWh) in parallel |
| Capacity (Ah) | 200 |
| Battery Chemistry | LiFePO4 |
| Charge / Discharge' Nominal | Charge : 198 / Discharge: 240 |
| Certification | UN38.3, IEC62619, CE, CEI 0-21, VDE2510-50, CEC |
| Working Temperature | Charge: 0~55°C/Discharge: -20°C~55°C |
| Battery Data | |
| Battery Type / Chemistry | LiFePO, |
| Capacity | 200 Ah |
| Battery Energy Capacity | 10.2 kWh |
| Recommended DoD | 90% |
| Usable Energy | 9.2 (90%DOD) kWh |
| Max Charge Rate (C) | 1C |
| Max Discharge Rate (C) | 1.2C |
| Max System Capacity | 326 kWh |
| Communication | |
| Communication Interface | CAN2.0, RS485 |
| Electrical / AC Output Data | |
| Energy Throughput | 32MWh (25°C, 0.5C/0.5C, 70%EOL) |
| Status Indicator | SOC state ( 20% ~ 100%), work state (alarming, protecting ) |
| Nominal Voltage | 51.2 V |
| Operating Voltage Range | 43.2~57.6 V |
| Rated AC Power | 6 kW |
| Max Parallel Units | 32 pcs |
| General Data | |
| Warranty | 10years |
| Protection Features | |
| Built-in Circuit Breaker | 125A 4P, 60Vdc |
| IP Rating | IP65 |
| Mechanical Data | |
| Design / Form Factor | Wall-Mounted, Floor-Mounted |
| Cooling | Natural Cooling |
| Installation / Mounting | Wall or Floor Mount |
| Operating Conditions | |
| Max Altitude | ≤3000m |
| Relative Humidity | 5%~95% |
| Operating Temperature | Charge : 1~55°C / Discharge:-20°C ~ 55 |
| Storage Temperature Range | 0°C~35 |
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in Yemen
| Market | Yemen |
| Grid authority / regulator | Public Electricity Corporation (PEC), Ministry of Electricity and Energy |
| Quotation currency | YER |
| Support hours timezone | Asia/Aden |
| Delivery & installation coverage | Sana'a, Aden, Taiz, Al Hudaydah, Mukalla |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Yemen that is Public Electricity Corporation (PEC), Ministry of Electricity and Energy. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- 10.2 kWh Capacity: 9.2 kWh usable at 90% DoD
- IP65 Protection: Indoor and outdoor installation
- 125A Circuit Breaker: Built-in safety protection
- Auto-Networking: No DIP switch coding needed
- Scalable to 326 kWh: Up to 32 units in parallel
- Eco-Friendly: Non-toxic, pollution-free materials
Frequently Asked Questions
What inverters is the DEYE RW-F10.2 compatible with?
The RW-F10.2 pairs with DEYE hybrid and off-grid inverters and most 48V-architecture inverters that support its battery type setting. Confirm the inverter's battery-type (Batt-V) configuration matches before installation.
Is the DEYE RW-F10.2 suitable for hot climates like the Gulf?
Yes. The RW-F10.2 uses LiFePO4 chemistry with a BMS and thermal management designed to operate safely in the high ambient temperatures common across the Middle East and Africa.
What makes the RW-F10.2 easy to install?
The RW-F10.2 features auto-networking modules that eliminate DIP switch coding. The flat design supports both wall-mounted and floor-standing installation, and it integrates seamlessly with Deye inverters.
How much usable energy does it provide?
With 10.2 kWh nominal capacity and 90% depth of discharge, you get 9.2 kWh of usable energy - one of the highest usable ratios in its class.