Deye

Deye MS-GS215-2H3

A 215 kWh storage cabinet that charges straight from a 200 kW solar array, dispatching 100 kW of rated power and scaling to twenty paralleled units for large sites.

Models Covered: DEYE-MS-GS215-2H3

Manufacturer: Ningbo Deye Inverter Technology Co., Ltd

Application: The Deye MS-GS215-2H3 removes the separate solar inverter from the equation: its 200 kW PV input accepts arrays at up to 800 V, with MPPT tracking from 180 to 750 V and full-load tracking between 450 and 750 V, so the 215 kWh LiFePO4 reserve charges directly from the sun. From that reserve it dispatches 100 kW of rated DC power into a 3L+N+PE grid connection at a rated 152 A, up to 167 A, keeping harmonic distortion under 3% at up to 97.6% efficiency. Large sites scale it hard: 20 cabinets parallel toward a stated 4,300 kWh. The enclosure is rated IP54 with a C5 anti-corrosion grade suited to aggressive coastal air, and the 2,732 kg cabinet is crane-hoisted onto its foundation. It works from -20 to 50 degrees C at altitudes below 3,000 m, monitored over ETH or 4G with an LCD on the door.

Download PDF Datasheet WhatsApp Us

Technical Specifications

Parameter DEYE-MS-GS215-2H3
Battery Data
Energy 215 kWh
System Energy 215 kWh
Max. Capacity 4300 kWh
Nominal Voltage 51.2 V
Operating Voltage 660-864 V
Rated Capacity 280 Ah
Cell Chemistry LiFePO4
Cycle Life >6000
End-of-Life Capacity 70%
Rated DC Power 100 kW
Max. Round-Trip Efficiency 88%
Max. Efficiency 97.6%
Min. Battery Module Quantity 1
Parallel Units 20
Overvoltage Protection DC Type II, AC Type II
Grid Connection Form 3L+N+PE
Peak Power (Off-Grid) 1.1x of rated power
Power Factor -1 to 1
Total Harmonic Distortion (THD) <3%
AC Rated Current 152 A
Max. AC Output Current 167 A
Full-Load MPPT Voltage Range 450-750 V
Max. PV Input Power 200 kW
Max. PV Input Voltage 800 V
MPPT Voltage Range 180-750 V
Startup Voltage 200 V
Mechanical & Interface
Communication Ports ETH/4G
Dimensions 1865 x 2500 x 1000 mm
Additional Notes DC Injection Current: <0.5ln; AC Output Frequency and Voltag; Crane-hoisted
Status Indicator LCD
Weight 2732 kg
Environment & Protection
Altitude <3000 m
Anti-Corrosion Grade C5
Operating Humidity 15-85 (non-condensing)%
Installation Location Floor-Mounted (foundation)
Enclosure IP Rating IP54
Working Temperature -20 to 50 °C

Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.

Availability & grid compliance in Lebanon

Market Lebanon
Grid authority / regulator EDL Lebanon
Quotation currency LBP
Support hours timezone Asia/Beirut
Delivery & installation coverage Beirut, Tripoli, Sidon

Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Lebanon that is EDL Lebanon. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.

Key Features & Technical Highlights

  • Direct 200 kW solar input: PV connects at up to 800 V, with MPPT tracking from 180 to 750 V and a 200 V startup voltage.
  • 215 kWh dispatchable reserve: LiFePO4 cells of 280 Ah hold 215 kWh, dispatched at 100 kW of rated DC power.
  • Scales to 4,300 kWh: Twenty cabinets parallel together, toward a stated maximum capacity of 4,300 kWh.
  • C5 coastal corrosion grade: An IP54 enclosure with C5 anti-corrosion rating stands up to aggressive marine air.
  • Clean 3L+N+PE grid tie: AC output runs at a rated 152 A and up to 167 A, with harmonic distortion under 3% and 97.6% maximum efficiency.
  • Crane-hoisted foundation install: The 2,732 kg cabinet, at 1865 x 2500 x 1000 mm, is lifted by crane onto a prepared foundation.

Frequently Asked Questions

How much solar can the MS-GS215-2H3 take directly?

Its PV input accepts up to 200 kW at a maximum of 800 V, with an MPPT range of 180-750 V, a full-load MPPT window of 450-750 V and a 200 V startup voltage.

How does the MS-GS215-2H3 differ from a plain storage cabinet?

It charges its 215 kWh reserve straight from the array through built-in MPPT tracking, then feeds a 3L+N+PE grid connection at up to 167 A - no separate solar inverter in between.

What is the maximum size of an MS-GS215-2H3 installation?

Up to 20 units operate in parallel, and the stated maximum capacity is 4,300 kWh.

Is the MS-GS215-2H3 suitable for coastal sites?

Yes - its enclosure combines an IP54 rating with a C5 anti-corrosion grade, the class specified for aggressive coastal atmospheres.

What does installing the MS-GS215-2H3 involve?

The cabinet weighs 2,732 kg, measures 1865 x 2500 x 1000 mm and is crane-hoisted onto a foundation; it then operates from -20 to 50 degrees C below 3,000 m altitude.