Deye

Deye MS-GS215-2H3

A 215 kWh storage cabinet that charges straight from a 200 kW solar array, dispatching 100 kW of rated power and scaling to twenty paralleled units for large sites.

Models Covered: DEYE-MS-GS215-2H3

Manufacturer: Ningbo Deye Inverter Technology Co., Ltd

Application: The Deye MS-GS215-2H3 removes the separate solar inverter from the equation: its 200 kW PV input accepts arrays at up to 800 V, with MPPT tracking from 180 to 750 V and full-load tracking between 450 and 750 V, so the 215 kWh LiFePO4 reserve charges directly from the sun. From that reserve it dispatches 100 kW of rated DC power into a 3L+N+PE grid connection at a rated 152 A, up to 167 A, keeping harmonic distortion under 3% at up to 97.6% efficiency. Large sites scale it hard: 20 cabinets parallel toward a stated 4,300 kWh. The enclosure is rated IP54 with a C5 anti-corrosion grade suited to aggressive coastal air, and the 2,732 kg cabinet is crane-hoisted onto its foundation. It works from -20 to 50 degrees C at altitudes below 3,000 m, monitored over ETH or 4G with an LCD on the door.

Download PDF Datasheet WhatsApp Us

Technical Specifications

Parameter DEYE-MS-GS215-2H3
Battery Data
Energy 215 kWh
System Energy 215 kWh
Max. Capacity 4300 kWh
Nominal Voltage 51.2 V
Operating Voltage 660-864 V
Rated Capacity 280 Ah
Cell Chemistry LiFePO4
Cycle Life >6000
End-of-Life Capacity 70%
Rated DC Power 100 kW
Max. Round-Trip Efficiency 88%
Max. Efficiency 97.6%
Min. Battery Module Quantity 1
Parallel Units 20
Overvoltage Protection DC Type II, AC Type II
Grid Connection Form 3L+N+PE
Peak Power (Off-Grid) 1.1x of rated power
Power Factor -1 to 1
Total Harmonic Distortion (THD) <3%
AC Rated Current 152 A
Max. AC Output Current 167 A
Full-Load MPPT Voltage Range 450-750 V
Max. PV Input Power 200 kW
Max. PV Input Voltage 800 V
MPPT Voltage Range 180-750 V
Startup Voltage 200 V
Mechanical & Interface
Communication Ports ETH/4G
Dimensions 1865 x 2500 x 1000 mm
Additional Notes DC Injection Current: <0.5ln; AC Output Frequency and Voltag; Crane-hoisted
Status Indicator LCD
Weight 2732 kg
Environment & Protection
Altitude <3000 m
Anti-Corrosion Grade C5
Operating Humidity 15-85 (non-condensing)%
Installation Location Floor-Mounted (foundation)
Enclosure IP Rating IP54
Working Temperature -20 to 50 °C

Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.

Availability & grid compliance in Sudan

Market Sudan
Grid authority / regulator Sudanese Electricity Distribution Company (SEDC), Ministry of Energy and Petroleum
Quotation currency SDG
Support hours timezone Africa/Khartoum
Delivery & installation coverage Khartoum, Omdurman, Port Sudan, Kassala, Nyala

Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Sudan that is Sudanese Electricity Distribution Company (SEDC), Ministry of Energy and Petroleum. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.

Key Features & Technical Highlights

  • Direct 200 kW solar input: PV connects at up to 800 V, with MPPT tracking from 180 to 750 V and a 200 V startup voltage.
  • 215 kWh dispatchable reserve: LiFePO4 cells of 280 Ah hold 215 kWh, dispatched at 100 kW of rated DC power.
  • Scales to 4,300 kWh: Twenty cabinets parallel together, toward a stated maximum capacity of 4,300 kWh.
  • C5 coastal corrosion grade: An IP54 enclosure with C5 anti-corrosion rating stands up to aggressive marine air.
  • Clean 3L+N+PE grid tie: AC output runs at a rated 152 A and up to 167 A, with harmonic distortion under 3% and 97.6% maximum efficiency.
  • Crane-hoisted foundation install: The 2,732 kg cabinet, at 1865 x 2500 x 1000 mm, is lifted by crane onto a prepared foundation.

Frequently Asked Questions

How much solar can the MS-GS215-2H3 take directly?

Its PV input accepts up to 200 kW at a maximum of 800 V, with an MPPT range of 180-750 V, a full-load MPPT window of 450-750 V and a 200 V startup voltage.

How does the MS-GS215-2H3 differ from a plain storage cabinet?

It charges its 215 kWh reserve straight from the array through built-in MPPT tracking, then feeds a 3L+N+PE grid connection at up to 167 A - no separate solar inverter in between.

What is the maximum size of an MS-GS215-2H3 installation?

Up to 20 units operate in parallel, and the stated maximum capacity is 4,300 kWh.

Is the MS-GS215-2H3 suitable for coastal sites?

Yes - its enclosure combines an IP54 rating with a C5 anti-corrosion grade, the class specified for aggressive coastal atmospheres.

What does installing the MS-GS215-2H3 involve?

The cabinet weighs 2,732 kg, measures 1865 x 2500 x 1000 mm and is crane-hoisted onto a foundation; it then operates from -20 to 50 degrees C below 3,000 m altitude.