Deye RW-F10.2-B
10.24kWh scalable home battery with auto-networking, 1C charge/1.25C discharge, and IP65 protection.
Technical Specifications
| Parameter | DEYE-RW-F10.2-B |
|---|---|
| Additional Specifications | |
| Max System Capacity | 327 kWh |
| Capacity (Ah) | 200 |
| Battery Data | |
| Battery Type / Chemistry | LiFePO4 |
| Capacity | 200 Ah |
| Recommended Charge/Discharge Current | 100 |
| Battery Energy Capacity | 10.24 kWh |
| Recommended DoD | 90% |
| Max Charge Rate (C) | 1C |
| Max Discharge Rate (C) | 1.25C |
| Cycle Life | ≥6,000 cycles |
| End-of-Life Capacity | 70% |
| Electrical / AC Output Data | |
| Status Indicator | LED(SOC:20%~SOC100% and working state) |
| Nominal Voltage | 51.2 V |
| Operating Voltage Range | 44.8~57.6 V |
| Max Parallel Units | 32 (327kWh) |
| Protection Features | |
| IP Rating | IP65 |
| Mechanical Data | |
| Installation / Mounting | Wall or Floor |
| Operating Conditions | |
| Relative Humidity | 5%~95% |
| Storage Temperature Range | 32℉～95℉(0～35℃) |
| Operating Temperature | -20 to 55 °C |
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in Yemen
| Market | Yemen |
| Grid authority / regulator | Public Electricity Corporation (PEC), Ministry of Electricity and Energy |
| Quotation currency | YER |
| Support hours timezone | Asia/Aden |
| Delivery & installation coverage | Sana'a, Aden, Taiz, Al Hudaydah, Mukalla |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Yemen that is Public Electricity Corporation (PEC), Ministry of Electricity and Energy. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- 10.24kWh Capacity: Scalable to 327kWh
- Auto-Networking: No DIP switch needed
- 1.25C Discharge: High power capability
- IP65 Protection: Indoor/outdoor rated
- Remote Monitoring: Deye app support
- Flexible Install: Wall or floor mounting
Frequently Asked Questions
What inverters is the DEYE RW-F10.2-B compatible with?
The RW-F10.2-B pairs with DEYE hybrid and off-grid inverters and most 48V-architecture inverters that support its battery type setting. Confirm the inverter's battery-type (Batt-V) configuration matches before installation.
Is the DEYE RW-F10.2-B suitable for hot climates like the Gulf?
Yes. The RW-F10.2-B uses LiFePO4 chemistry with a BMS and thermal management designed to operate safely in the high ambient temperatures common across the Middle East and Africa.
How many modules can I connect?
The RW-F10.2-B supports up to 32 packs in parallel, providing a maximum capacity of 327kWh for large residential or small commercial applications.
What is auto-networking?
Auto-networking means the battery modules automatically connect and configure themselves without needing manual DIP switch coding, making installation and expansion much simpler.