Deye

Deye WS-GS2000-2H3

An integrated solar-storage station in a 20-ft high-cube container: 2,057 kWh of storage, 1,280 kW of PV capacity, 64 MPPTs and utility-grade grid communications.

Models Covered: DEYE-WS-GS2000-2H3

Manufacturer: Ningbo Deye Inverter Technology Co., Ltd

Application: The Deye WS-GS2000-2H3 collapses a solar-plus-storage plant into one 20-foot high-cube container. On the PV side it accepts up to 1,280 kW across 64 MPPTs (8 x 8), with a 180-750 V tracking range, 800 V maximum input and a 200 V start-up threshold. On the storage side, LiFePO4 modules at 819.2 V nominal hold 2,057 kWh, rated past 6,000 cycles to 70% capacity. Output reaches 1,100 kVA - 1,000 kW of rated DC power - onto a 400 V, 3L+N+PE grid connection at 50 Hz, with THD under 3%, a power factor of 0.8 leading to 0.8 lagging and off-grid peaks of 1.1x and 1.5x rated power. Round-trip efficiency is 88.5%, with maximum efficiency above 99%. Safety is containerized too: gas and water fire suppression, combustible-gas detection, smoke evacuation and 2-hour fire resistance, in an IP54, C4-M anti-corrosion shell. Modbus TCP, IEC104 and IEC61850 connect it to plant SCADA.

Download PDF Datasheet WhatsApp Us

Technical Specifications

Parameter DEYE-WS-GS2000-2H3
Battery Data
Energy 2057 kWh
Nominal Voltage 819.2 V
System Nominal Voltage 819.2 V
Operating Voltage 691.2-921.6 V
Rated Voltage Range 400/0.85Un-1.1Un V
Rated Capacity 314 Ah
Module Capacity 314 Ah
Cell Chemistry LiFePO4
Pack Configuration 1P16S
Cycle Life >6000
Rated DC Power 1000 kW
Max. Round-Trip Efficiency 88.5%
Max. Efficiency >99%
Min. Battery Module Quantity 1
Protection Features Combustible Gas Detection, Smoke Evacuation, 2h Fire Resistance
Grid Connection Form 3L+N+PE
Peak Power (Off-Grid) 1.1x/1.5x of rated power
Power Factor 0.8 Leading-0.8 Lagging
Total Harmonic Distortion (THD) <3 (of rated power)%
Frequency Range 50/45-55 Hz
AC Rated Current 1443 (180.4 per unit) A
Max. Apparent Power 1100 kVA
Full-Load MPPT Voltage Range 450-750 V
Max. Input Short-Circuit Current 3840 (60 per mppt) A
Max. Operating PV Input Current 2560 (40 per mppt) A
Max. PV Input Power 1280 (160 per unit) kW
Max. PV Input Voltage 800 V
Number of MPPTs 64 (8 x 8)
MPPT Voltage Range 180-750 V
Rated PV Input Voltage 600 V
Startup Voltage 200 V
Mechanical & Interface
Communication Ports RJ45
Communication Protocol Modbus TCP, IEC104, IEC61850
Dimensions 20ft (HC) mm
Weight <26000 kg
Environment & Protection
Altitude <3000 m
Anti-Corrosion Grade C4-M
Fire Suppression Gas, Water
Operating Humidity 0-90%
Installation Location Floor-Mounted
Enclosure IP Rating IP54
Storage Temperature -20 to 60 °C
Cooling Type Air Cooling
Working Temperature -20 to 55 °C

Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.

Availability & grid compliance in Sudan

Market Sudan
Grid authority / regulator Sudanese Electricity Distribution Company (SEDC), Ministry of Energy and Petroleum
Quotation currency SDG
Support hours timezone Africa/Khartoum
Delivery & installation coverage Khartoum, Omdurman, Port Sudan, Kassala, Nyala

Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Sudan that is Sudanese Electricity Distribution Company (SEDC), Ministry of Energy and Petroleum. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.

Key Features & Technical Highlights

  • A plant in a box: 2,057 kWh of LiFePO4 storage at 819.2 V nominal inside one 20-ft high-cube container weighing under 26,000 kg.
  • 1,280 kW of PV intake: 64 MPPTs (8 x 8) track from 180 to 750 V, with 800 V maximum input and full-load range of 450-750 V.
  • 1,100 kVA of output: 1,000 kW rated DC power onto a 400 V, 3L+N+PE connection at 50 Hz, with THD under 3%.
  • Engineered fire safety: Gas and water suppression, combustible-gas detection, smoke evacuation and 2-hour fire resistance.
  • Speaks utility SCADA: Modbus TCP, IEC104 and IEC61850 over RJ45 for plant-level control.
  • 88.5% round-trip efficiency: Maximum efficiency exceeds 99%, with off-grid peak output of 1.1x and 1.5x rated power.

Frequently Asked Questions

What scale of project suits the WS-GS2000-2H3?

Utility and large commercial-industrial plants: each container carries 2,057 kWh of storage, 1,280 kW of PV input and 1,100 kVA of output capability.

Does the WS-GS2000-2H3 need separate inverters?

Power conversion is part of the container: it delivers up to 1,100 kVA at 400 V (3L+N+PE, 50 Hz) with THD below 3% and a 0.8 leading to 0.8 lagging power factor.

How does the WS-GS2000-2H3 talk to plant control systems?

Over RJ45 using Modbus TCP, IEC104 and IEC61850 - the protocols utility SCADA systems expect.

What fire protection is built into the WS-GS2000-2H3?

Gas and water fire suppression, combustible-gas detection, smoke evacuation and a 2-hour fire-resistance rating.

What site conditions does the container tolerate?

Working temperatures of -20 to 55 degrees Celsius, 0-90% humidity and altitudes below 3,000 m, with an IP54 enclosure and C4-M anti-corrosion grade.