Deye RW-F10.2-B
A 10.24 kWh, 51.2 V LiFePO4 battery in a weather-sealed IP65 housing, rated for 1.25C discharge and expandable to a stated 327 kWh across 32 units.
Technical Specifications
| Parameter | DEYE-RW-F10.2-B |
|---|---|
| Battery Data | |
| Energy | 10.24 kWh |
| Max. Capacity | 327 kWh |
| Nominal Voltage | 51.2 V |
| Operating Voltage | 44.8-57.6 V |
| Rated Capacity | 200 Ah |
| Cell Chemistry | LiFePO4 |
| Cycle Life | >6000 |
| End-of-Life Capacity | 70% |
| Recommended Depth of Discharge | 90% |
| Max. Charge Rate | 1C |
| Max. Discharge Rate | 1.25C |
| Recommended Charge/Discharge Current | 100 A |
| Min. Battery Module Quantity | 1 |
| Parallel Units | 32 |
| Mechanical & Interface | |
| Dimensions | 600 x 830 x 200 mm |
| Status Indicator | LED (SOC 20%-100% and working state) |
| Weight | 107 kg |
| Environment & Protection | |
| Operating Humidity | 5-95% |
| Installation Location | Wall-Mounted, Floor-Mounted |
| Enclosure IP Rating | IP65 |
| Storage Temperature | 0-35 °C |
| Working Temperature | -20 to 55 °C |
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in UAE
| Market | UAE |
| Grid authority / regulator | DEWA, ADDC, SEWA |
| Quotation currency | AED |
| Support hours timezone | Asia/Dubai |
| Delivery & installation coverage | Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in UAE that is DEWA, ADDC, SEWA. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- 10.24 kWh compact block: 200 Ah LiFePO4 cells at 51.2 V store 10.24 kWh, used at a recommended 90% depth of discharge.
- 1.25C discharge capability: Discharges at up to 1.25C and charges at 1C, with a recommended working current of 100 A.
- Weatherproof IP65 housing: Sealed against dust and water jets for placement beyond the equipment room.
- Works -20 to 55 °C: Operates across -20 to 55 degrees C at 5-95% humidity, stored between 0 and 35 degrees C.
- Stacks to 327 kWh: Up to 32 units in parallel reach a stated maximum capacity of 327 kWh.
- LED state-of-charge display: An LED indicator tracks charge from 20% to 100% and reports working status at a glance.
Frequently Asked Questions
What systems is the RW-F10.2-B designed for?
It is a 51.2 V nominal battery with an operating window of 44.8-57.6 V, which places it with low-voltage hybrid inverters rather than high-voltage bus systems.
How much power can the RW-F10.2-B push?
Its discharge rate reaches 1.25C from 200 Ah cells, with charging at up to 1C and a recommended charge and discharge current of 100 A.
What is the expansion path for the RW-F10.2-B?
Thirty-two units can operate in parallel, and the stated maximum capacity of such a system is 327 kWh.
Does weather affect where the RW-F10.2-B can go?
Its IP65 rating seals it against dust and water jets, and it works from -20 to 55 degrees C at 5-95% humidity, so placement is flexible.
How long will the RW-F10.2-B last?
The cells are rated for more than 6,000 cycles, retaining 70% of capacity at end of life when used at the recommended 90% depth of discharge.