Deye SE-F12
A 12.03 kWh low-voltage LiFePO4 battery from Deye's SE line, delivering 10.83 kWh of usable energy per cycle and scaling to 384.96 kWh in parallel.
Technical Specifications
| Parameter | DEYE-SE-F12 |
|---|---|
| Battery Data | |
| Energy | 12.03 kWh |
| Usable Energy | 10.83 kWh |
| Max. Capacity | 384.96 kWh |
| Nominal Voltage | 51.2 V |
| Operating Voltage | 44.8-57.6 V |
| Rated Capacity | 235 Ah |
| Cell Chemistry | LiFePO4 |
| Cycle Life | >6000 |
| End-of-Life Capacity | 70% |
| Energy Throughput | 37 MWh |
| Recommended Depth of Discharge | 90% |
| Rated DC Power | 3.5 kW |
| Max. Charge Current | 230 A |
| Max. Discharge Current | 230 A |
| Max. Charge/Discharge Current | 230 A |
| Recommended Charge/Discharge Current | 115 A |
| Peak Discharge Current | 280 (10s) A |
| Min. Battery Module Quantity | 1 |
| Parallel Units | 32 |
| Warranty (Years) | 10 |
| Mechanical & Interface | |
| Communication Ports | CAN2.0, RS485, Bluetooth, APP |
| Dimensions | 400 x 599 x 233 mm |
| Additional Notes | Peak charge current stated (10s); max 64 pcs parallel with CAN-Bridge |
| Status Indicator | LED (SOC, working, protecting), Buzzer |
| Weight | 84 kg |
| Environment & Protection | |
| Altitude | <3000 m |
| Charge Temperature | 0-55 °C |
| Discharge Temperature | -20 to 55 °C |
| Operating Humidity | 0-95% |
| Installation Location | Wall-Mounted, Floor-Mounted, Stack-Mounted |
| Enclosure IP Rating | IP21 |
| Storage Temperature | 0-35 °C |
| Working Temperature | Charge: 0-55 / Discharge: -20 to 55 °C |
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in UAE
| Market | UAE |
| Grid authority / regulator | DEWA, ADDC, SEWA |
| Quotation currency | AED |
| Support hours timezone | Asia/Dubai |
| Delivery & installation coverage | Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in UAE that is DEWA, ADDC, SEWA. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- Deep usable capacity: 12.03 kWh nominal with 10.83 kWh usable at the recommended 90% depth of discharge.
- High-current surge handling: 230 A continuous charge and discharge, with a 280 A discharge peak held for 10 seconds behind a 3.5 kW rated DC output.
- Built for long service: LiFePO4 cells rated beyond 6,000 cycles to 70% end-of-life capacity, with 37 MWh of energy throughput.
- Grows to 384.96 kWh: Up to 32 units run in parallel, and as many as 64 with a CAN-Bridge.
- Connected and monitored: CAN2.0 and RS485 talk to the inverter while Bluetooth and the app keep owners informed; an LED display and buzzer report status.
- Flexible mounting options: Wall, floor or stack installation in a 400 x 599 x 233 mm, 84 kg enclosure.
Frequently Asked Questions
Which inverters can the SE-F12 work with?
It is a 51.2 V nominal battery with a 44.8-57.6 V operating window, so it belongs with low-voltage hybrid inverters; it communicates over CAN2.0 and RS485.
How far can I expand a bank of SE-F12 units?
Up to 32 batteries connect in parallel, and the datasheet allows up to 64 with a CAN-Bridge, giving a maximum system capacity of 384.96 kWh.
What warranty does the SE-F12 carry?
Deye publishes a 10-year warranty term for this model, alongside a cycle-life rating above 6,000 cycles to 70% capacity and 37 MWh of energy throughput.
Where can the SE-F12 be installed?
It supports wall, floor and stack mounting; with an IP21 enclosure it should be placed in a protected location, at altitudes below 3,000 m and 0-95% humidity.
What temperatures does the SE-F12 tolerate?
Charging is specified from 0 to 55 degrees Celsius and discharging from -20 to 55 degrees Celsius, with storage recommended between 0 and 35 degrees Celsius.