Deye Solar Batteries 5.12 kWh SE-F5

An entry point into Deye's SE-F line: 5.12 kWh of LiFePO4 storage at 51.2 V in a slim pack only 140 mm deep, ready to grow with the system.

Models Covered: DEYE-SE-F5

Manufacturer: Ningbo Deye Inverter Technology Co., Ltd

Application: Start with what today's loads need and leave the ceiling high: the Deye SE-F5 puts 5.12 kWh of 51.2 V LiFePO4 storage into a 370 x 548 x 140 mm pack weighing just 41 kg, so a single installer can hang it on a wall, set it on the floor or add it to a stack. At the recommended 80% depth of discharge it yields 4.1 kWh per cycle, backed by a rating of more than 6,000 cycles to 70% capacity and 8 MWh of energy throughput. It charges at up to 100 A and discharges at up to 120 A - 150 A for ten-second peaks - around a 1.5 kW rated DC output. As consumption grows, up to 32 packs run in parallel, topping out at 163.84 kWh - or 64 packs with a CAN-Bridge. CAN2.0, RS485, Bluetooth and an app cover inverter communication and monitoring, and Deye states a 10-year warranty for this model. We are an authorised Deye distributor and supply the SE-F5 from our own stock, with technical support before and after the sale.

Models and prices

Technical Specifications

Technical Specifications
ParameterDEYE-SE-F5
Battery Data
Energy5.12 kWh
Usable Energy4.1 kWh
Max. Capacity163.84 kWh
Nominal Voltage51.2 V
Operating Voltage44.8-57.6 V
Rated Capacity100 Ah
Cell ChemistryLiFePO4
Cycle Life>6000
End-of-Life Capacity70%
Energy Throughput8 MWh
Recommended Depth of Discharge80%
Rated DC Power1.5 kW
Max. Charge Current100 A
Max. Discharge Current120 A
Max. Charge/Discharge Current100/120 A
Recommended Charge/Discharge Current30 A
Peak Discharge Current150 (10s) A
Min. Battery Module Quantity1
Parallel Units32
Warranty (Years)10
Mechanical & Interface
Communication PortsCAN2.0, RS485, Bluetooth, APP
Dimensions370 x 548 x 140 mm
Additional NotesPeak charge current stated (10s); max 64 pcs parallel with CAN-Bridge
Status IndicatorLED (SOC, working, protecting), Buzzer
Weight41 kg
Environment & Protection
Altitude<3000 m
Charge Temperature0-55 °C
Discharge Temperature-20 to 55 °C
Operating Humidity0-95%
Installation LocationWall-Mounted, Floor-Mounted, Stack-Mounted
Enclosure IP RatingIP21
Storage Temperature0-35 °C
Working TemperatureCharge: 0-55 / Discharge: -20 to 55 °C

Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.

Availability & grid compliance in the UAE

MarketUAE
Grid authority / regulatorDEWA, ADDC, SEWA
Quotation currencyAED
Support hours timezoneAsia/Dubai
Main citiesDubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah

Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in the UAE that rests with the local authorities (DEWA, ADDC, SEWA). Confirm the grid code, import requirements and any local certification with them, or with us, before you order.

Authorised Deye distributor for the UAE — certificate No. GFKFLFI1.

More in the UAE

For prices, see Deye Solar Inverters & Lithium Batteries: Prices in UAE. Store pickup — collect your order from our store in Dubai or Riyadh.

This market by city

Key Features & Technical Highlights

  • Right-sized starter capacity: 5.12 kWh at 51.2 V, with 4.1 kWh usable at the recommended 80% depth of discharge.
  • One-person installation: At 41 kg and only 140 mm deep, the pack suits single-installer wall mounting as well as floor or stack placement.
  • Peak-ready current: 100 A maximum charge and 120 A maximum discharge, with a 150 A ten-second peak around 1.5 kW of rated DC power.
  • Expandable to 163.84 kWh: Thirty-two packs connect in parallel, or 64 using a CAN-Bridge.
  • 6,000-cycle chemistry: LiFePO4 cells rated past 6,000 cycles to 70% end-of-life capacity, with 8 MWh of throughput.
  • Talks to everything: CAN2.0 and RS485 for the inverter, Bluetooth and app for the owner, LED and buzzer for on-site status.

Frequently Asked Questions

What systems does the SE-F5 connect to?

The SE-F5 is a 51.2 V low-voltage battery with a 44.8-57.6 V operating window; it talks to hybrid inverters over CAN2.0 or RS485.

Can I add more SE-F5 packs later?

Yes - the design allows 32 packs in parallel for a bank of 163.84 kWh, and up to 64 packs with a CAN-Bridge.

How much power can one SE-F5 sustain?

It is rated for 1.5 kW of DC power, with discharge current up to 120 A continuously and 150 A for ten-second peaks.

What depth of discharge should I plan with on the SE-F5?

Deye recommends 80% for this model, which corresponds to the 4.1 kWh usable figure; the recommended charge and discharge current is 30 A.

Does the SE-F5 work outdoors or in the cold?

The enclosure is IP21, so it needs a protected location; charging is specified from 0 to 55 degrees Celsius and discharge from -20 to 55 degrees Celsius.