Thin-cable high voltage
512 V nominal across a 448-584 V window keeps maximum current at just 20 A.

Solar BatteriesModel SS-F10
A 10 kWh high-voltage (512 V) LiFePO4 wall battery with IP65 protection, charging down to -20 degrees Celsius and up to six units in parallel for a stated 60 kWh.
In stock
512 V nominal across a 448-584 V window keeps maximum current at just 20 A.
Sealed against dust and water, with humidity tolerance from 0 to 100%.
Both charging and discharging are rated from -20 to 55 degrees Celsius.
A recommended 90% depth of discharge on a 10 kWh, 20 Ah pack, with six units paralleling to a stated 60 kWh.
Master-slave BMS with passive balancing, plus optional DC arc detection.
SOC and fault codes on the indicator, with CAN2.0 and RS485 to the inverter.
High-voltage architecture keeps currents small and cables thin: at 512 V nominal, the Deye SS-F10 moves 10 kWh with a maximum of just 20 A, operating across a 448-584 V window with high-voltage battery inverters. The IP65 enclosure shrugs off dust and water, and the pack both charges and discharges from -20 to 55 degrees Celsius - cold mornings included - with humidity tolerance up to 100%. Six units can parallel into a stated 60 kWh system. A master-slave BMS with passive balancing manages the LiFePO4 cells, optional DC arc detection adds a further safeguard, and SOC plus fault codes surface on the indicator. Rated beyond 6,000 cycles to 70% end-of-life capacity with a recommended 90% depth of discharge, the 85 kg, 850 x 650 x 170 mm slab mounts on a wall or floor and carries a stated 10-year warranty. Communication with the inverter runs over CAN2.0 and RS485. We are an authorised Deye distributor and supply the SS-F10 from our own stock, with technical support before and after the sale.
Specifications last updated 24 January 2026
| Energy | 10 kWh |
|---|---|
| System Energy | 10 kWh |
| Max. Capacity | 60 kWh |
| Nominal Voltage | 512 V |
| System Nominal Voltage | 512 V |
| Operating Voltage | 448-584 V |
| Rated Capacity | 20 Ah |
| Cell Chemistry | LiFePO4 |
| Cycle Life | >6000 |
| End-of-Life Capacity | 70 % |
| Recommended Depth of Discharge | 90 % |
|---|---|
| Max. Charge Current | 20 A |
| Max. Discharge Current | 20 A |
| Max. Charge/Discharge Current | 20 A |
| Recommended Charge/Discharge Current | 10 A |
| Min. Battery Module Quantity | 1 |
| Parallel Units | 6 |
| Protection Features | Master-Slave BMS, Passive Balancing, DC Arc Detection (optional) |
| Warranty (Years) | 10 |
| Communication Ports | CAN2.0, RS485 |
|---|---|
| Dimensions | 850 x 650 x 170 mm |
| Status Indicator | SOC, fault codes |
| Weight | 85 kg |
| Altitude | <3000 m |
|---|---|
| Charge Temperature | -20 to 55 °C |
| Discharge Temperature | -20 to 55 °C |
| Operating Humidity | 0-100 % |
| Installation Location | Wall-Mounted, Floor-Mounted |
| Enclosure IP Rating | IP65 |
| Storage Temperature | 0-35 °C |
| Working Temperature | Charge/Discharge: -20 to 55 °C |
A high-voltage battery inverter: the SS-F10 runs at 512 V nominal across a 448-584 V operating window.
Its IP65 rating and 0-100% humidity tolerance are built for demanding placements, with operation from -20 to 55 degrees Celsius; altitude must stay below 3,000 m.
No - charging is specified down to -20 degrees Celsius, the same lower bound as discharge.
Up to six units in parallel, for a stated maximum of 60 kWh.
A master-slave BMS with passive balancing, and optional DC arc detection; the recommended operating current is 10 A against a 20 A maximum.