98.5% Efficiency
Maximum energy conversion

Solar InvertersModel SUN-23K-G05
23kW three phase string inverter with 98.5% efficiency and dual MPPT.
Deye SUN-23K-G05, 23 kW, is also searched as deye inverter.
In stock
Maximum energy conversion
Two independent trackers
Grid export management
Virtual Synchronous Generator
Dust and water resistant
GPRS, WiFi, Bluetooth, 4G, LAN
The Deye SUN-23K-G05 is a 23 kW three-phase string inverter, the intermediate step in the String (G) ladder that lets an installer match a 29.9 kW array without moving up a frame size. Monitoring runs over RS485 or RS232, and the communication port takes an optional GPRS, Wi-Fi, Bluetooth, 4G or LAN module, so the same unit reports from a rooftop with no cabling or from a plant room on a wired network. Per-string monitoring and arc-fault detection are offered as options, while DC component monitoring, insulation impedance detection and residual current detection are built in. The rated AC output is 23 kW on a 3L+N+PE connection, rising to 25.3 kVA of apparent power and 38.4 A per phase. Both MPPT trackers work between 200 and 1000 V under an 1100 V input limit. An integrated DC switch and a stated 5-year warranty complete the package. We are an authorised Deye distributor and supply the SUN-23K-G05 from our own stock, with technical support before and after the sale.
Specifications last updated 24 January 2026
| AC Output Overcurrent Protection | Yes |
|---|---|
| AC Output Overvoltage Protection | Yes |
| AC Output Short-Circuit Protection | Yes |
| AC Voltage Tolerance (×Un) | 0.85-1.1 |
| Anti-Islanding Protection | Yes |
| Anti-PID Function | Optional |
| Arc Fault Circuit Interrupter (AFCI) | Optional |
| DC Component Monitoring | Yes |
| DC Injection Current (% of In) | <0.5 |
| DC Reverse Polarity Protection | Yes |
| European Efficiency | 98.0 % |
| Grid Connection Form | 3L+N+PE |
| Insulation Impedance Detection | Yes |
| Inverter Topology | Non-Isolated |
| Max. AC Output Apparent Power | 25300 VA |
| Max. AC Output Current | 38.4/36.7 A |
| Max. Efficiency | 98.5 % |
| Max. Input Short-Circuit Current | 39+39 A |
| Max. Operating PV Input Current | 26+26 A |
| Max. PV Input Power | 29900 W |
| Max. PV Input Voltage | 1100 V |
|---|---|
| Number of MPPTs | 2 |
| MPPT Efficiency | >99 % |
| MPPT Voltage Range | 200-1000 V |
| Overvoltage Category | OVC II(DC), OVC III(AC) |
| Power Factor Range (Leading to Lagging) | 0.8-0.8 |
| Rated AC Output Active Power | 23000 W |
| Rated AC Output Current | 34.9/33.4 A |
| Rated Grid Frequency | 50/45-55, 60/55-65 Hz |
| Rated Output Voltage | 220/380, 230/400 V |
| Rated PV Input Voltage | 600 V |
| Residual Current Detection | Yes |
| Startup Voltage | 250 V |
| Strings per MPPT | 2+2 |
| Surge Protection Level | TYPE II(DC), TYPE II(AC) |
| Current Total Harmonic Distortion (THDi) | <3 % |
| Virtual Synchronous Generator (VSG) Support | Yes |
| Warranty (Years) | 5 |
| Zero Export Support | Yes |
| Cabinet Dimensions | 362 x 527 x 220 mm |
|---|---|
| Communication Interfaces | RS485, RS232 |
| DC Switch | Yes |
| Monitoring Modes | GPRS, Wi-Fi, Bluetooth, 4G, LAN (optional) |
| String Monitoring | Optional |
| Weight | 20 kg |
| Derating Start Temperature | 45 °C |
|---|---|
| IP Rating | IP65 |
| Noise Level | <50 dB |
| Operating Temperature Range | -25 to 60 °C |
| Max. Operating Altitude | 4000 m |
| Permissible Ambient Humidity | 0-100 % |
| Thermal Protection | Yes |
| Cooling Type | Intelligent Air Cooling |
Looking up an error code on this Deye SUN G04/G05/G06 3-Phase? Browse the full list of codes for this device, with the cause and recommended fix for each.
View error codes for this device →Yes. The SUN-23K-G05 is rated -25 to 60 °C, with derating above 45 °C, which covers the heat and dust of the Gulf, North Africa and the wider MEA region. Mount it in shade for the best summer output. Its IP 65 rating handles dust and humidity.
The SUN-23K-G05 series operates with an MPPT voltage range of 200-1000V, providing flexibility in solar panel selection and system design.
Yes. The SUN-23K-G05 supports zero export: it holds what it feeds to the grid at the export limit you set, so its 23 kW of output serves your own loads first.