97.5% Efficiency
High energy conversion

Solar InvertersModel SUN-3K-G04P1-EU-AM1
3kW single phase string inverter with 97.5% efficiency and 80V low start-up voltage.
Deye SUN-3K-G04P1-EU-AM1, 3 kW, is also searched as deye inverter.
In stock
High energy conversion
Works in low-light conditions
Manage grid export limits
Grid stability contribution
Outdoor rated
Silent operation
The Deye SUN-3K-G04P1-EU-AM1 is a 3 kW single-phase G04P1 string inverter for grid-tied rooftops on a 220/230 V L+N+PE supply. Setup and firmware work go through RS485 or RS232, and a Bluetooth, Wi-Fi, GPRS, 4G or optional LAN stick reports generation to the app, so a small crew needs no laptop at the top of the ladder. Rated AC output active power is 3000 W, with 3.3 kVA of apparent power and 13.7/13.1 A of rated output current at 50/45-55 or 60/55-65 Hz. A single MPPT is fed by one string and takes up to 3.9 kW of PV input, capped at 550 V, tracking across 70-500 V around a 360 V rated PV input voltage. At 5.6 kg in a 280 x 272.5 x 171.5 mm case, the naturally cooled IP65 unit mounts on an outside wall, tolerates 0-100% humidity, and is covered by a stated 5-year warranty. We are an authorised Deye distributor and supply the SUN-3K-G04P1-EU-AM1 from our own stock, with technical support before and after the sale.
Specifications last updated 24 January 2026
| AC Output Overcurrent Protection | Yes |
|---|---|
| AC Output Overvoltage Protection | Yes |
| AC Output Short-Circuit Protection | Yes |
| AC Voltage Tolerance (×Un) | 0.85-1.1 |
| Anti-Islanding Protection | Yes |
| Anti-PID Function | Optional |
| Arc Fault Circuit Interrupter (AFCI) | Optional |
| DC Component Monitoring | Yes |
| DC Injection Current (% of In) | <0.5 |
| DC Reverse Polarity Protection | Yes |
| European Efficiency | 97.0 % |
| Grid Connection Form | L+N+PE |
| Insulation Impedance Detection | Yes |
| Inverter Topology | Non-Isolated |
| Max. AC Output Apparent Power | 3300 VA |
| Max. AC Output Current | 15/14.4 A |
| Max. Efficiency | 97.5 % |
| Max. Input Short-Circuit Current | 30 A |
| Max. Operating PV Input Current | 20 A |
| Max. PV Input Power | 3900 W |
| Max. PV Input Voltage | 550 V |
|---|---|
| Number of MPPTs | 1 |
| MPPT Efficiency | >99 % |
| MPPT Voltage Range | 70-500 V |
| Overvoltage Category | OVC II(DC), OVC III(AC) |
| Power Factor Range (Leading to Lagging) | 0.8-0.8 |
| Rated AC Output Active Power | 3000 W |
| Rated AC Output Current | 13.7/13.1 A |
| Rated Grid Frequency | 50/45-55, 60/55-65 Hz |
| Rated Output Voltage | 220/230 V |
| Rated PV Input Voltage | 360 V |
| Residual Current Detection | Yes |
| Startup Voltage | 80 V |
| Strings per MPPT | 1 |
| Surge Protection Level | TYPE II(DC), TYPE II(AC) |
| Current Total Harmonic Distortion (THDi) | <3 % |
| Virtual Synchronous Generator (VSG) Support | Yes |
| Warranty (Years) | 5 |
| Zero Export Support | Yes |
| Cabinet Dimensions | 280 x 272.5 x 171.5 mm |
|---|---|
| Communication Interfaces | RS485, RS232 |
| DC Switch | Yes |
| Monitoring Modes | GPRS, Wi-Fi, Bluetooth, 4G, LAN (optional) |
| String Monitoring | Optional |
| Weight | 5.6 kg |
| Derating Start Temperature | 45 °C |
|---|---|
| IP Rating | IP65 |
| Noise Level | <35 dB |
| Operating Temperature Range | -25 to 65 °C |
| Max. Operating Altitude | 2000 m |
| Permissible Ambient Humidity | 0-100 % |
| Thermal Protection | Yes |
| Cooling Type | Natural Cooling |
Looking up an error code on this Deye SUN G04P1/G05P1 Series? Browse the full list of codes for this device, with the cause and recommended fix for each.
View error codes for this device →Yes. The SUN-3K-G04P1-EU-AM1 is rated -25 to 65 °C, with derating above 45 °C, which covers the heat and dust of the Gulf, North Africa and the wider MEA region. Mount it in shade for the best summer output. Its IP 65 rating handles dust and humidity.
The SUN-3K-G04P1-EU-AM1 starts up at just 80V, enabling optimal performance even in low-light conditions like early morning or cloudy days.
Yes. The SUN-3K-G04P1-EU-AM1 supports zero export: it holds what it feeds to the grid at the export limit you set, so its 3 kW of output serves your own loads first.