98.5% Efficiency
Maximum energy conversion

Solar InvertersModel SUN-15K-G05
15kW three phase string inverter with 98.5% efficiency and dual MPPT trackers.
Deye SUN-15K-G05, 15 kW, is also searched as deye inverter.
String solar inverter price in the UAE: AED 6,399 – Deye 15 kW SUN-15K-G05.
incl. VATIn stock
Our retail price in the UAE: we sell direct and deliver within 3 business days, door to door.
Maximum energy conversion
Two independent trackers
Protects PV module performance
Virtual Synchronous Generator
GPRS, WiFi, Bluetooth, 4G, LAN
-25°C to 60°C operation
The Deye SUN-15K-G05 is a 15 kW three-phase string inverter in the G05 series, connected 3L+N+PE at 220/380 or 230/400 V for a villa compound, a clinic or a small commercial roof. Installers set it up over RS485 or RS232 and then follow it through a GPRS, Wi-Fi, Bluetooth, 4G or optional LAN monitoring module. Its rated AC output active power is 15000 W, with 16.5 kVA of apparent power and 22.7/21.7 A of rated output current. The DC side is deliberately asymmetric: two MPPTs split strings 1+2 and draw 20+26 A, accepting up to 19.5 kW of PV input power against a 1000 V maximum, so one long south string and two shorter roof faces can share a single machine. Tracking spans 200-850 V from a 250 V startup. Intelligent air cooling stays under 40 dB, and the 15 kg IP65 unit carries a stated 5-year warranty. We are an authorised Deye distributor and supply the SUN-15K-G05 from our own stock, with technical support before and after the sale.
Specifications last updated 24 January 2026
| AC Output Overcurrent Protection | Yes |
|---|---|
| AC Output Overvoltage Protection | Yes |
| AC Output Short-Circuit Protection | Yes |
| AC Voltage Tolerance (×Un) | 0.85-1.1 |
| Anti-Islanding Protection | Yes |
| Anti-PID Function | Optional |
| Arc Fault Circuit Interrupter (AFCI) | Optional |
| DC Component Monitoring | Yes |
| DC Injection Current (% of In) | <0.5 |
| DC Reverse Polarity Protection | Yes |
| European Efficiency | 98.0 % |
| Grid Connection Form | 3L+N+PE |
| Insulation Impedance Detection | Yes |
| Inverter Topology | Non-Isolated |
| Max. AC Output Apparent Power | 16500 VA |
| Max. AC Output Current | 25/23.9 A |
| Max. Efficiency | 98.5 % |
| Max. Input Short-Circuit Current | 30+39 A |
| Max. Operating PV Input Current | 20+26 A |
| Max. PV Input Power | 19500 W |
| Max. PV Input Voltage | 1000 V |
|---|---|
| Number of MPPTs | 2 |
| MPPT Efficiency | >99 % |
| MPPT Voltage Range | 200-850 V |
| Overvoltage Category | OVC II(DC), OVC III(AC) |
| Power Factor Range (Leading to Lagging) | 0.8-0.8 |
| Rated AC Output Active Power | 15000 W |
| Rated AC Output Current | 22.7/21.7 A |
| Rated Grid Frequency | 50/45-55, 60/55-65 Hz |
| Rated Output Voltage | 220/380, 230/400 V |
| Rated PV Input Voltage | 600 V |
| Residual Current Detection | Yes |
| Startup Voltage | 250 V |
| Strings per MPPT | 1+2 |
| Surge Protection Level | TYPE II(DC), TYPE II(AC) |
| Current Total Harmonic Distortion (THDi) | <3 % |
| Virtual Synchronous Generator (VSG) Support | Yes |
| Warranty (Years) | 5 |
| Zero Export Support | Yes |
| Cabinet Dimensions | 332 x 472 x 203 mm |
|---|---|
| Communication Interfaces | RS485, RS232 |
| DC Switch | Yes |
| Monitoring Modes | GPRS, Wi-Fi, Bluetooth, 4G, LAN (optional) |
| String Monitoring | Optional |
| Weight | 15 kg |
| Derating Start Temperature | 45 °C |
|---|---|
| IP Rating | IP65 |
| Noise Level | <40 dB |
| Operating Temperature Range | -25 to 60 °C |
| Max. Operating Altitude | 4000 m |
| Permissible Ambient Humidity | 0-100 % |
| Thermal Protection | Yes |
| Cooling Type | Intelligent Air Cooling |
Looking up an error code on this Deye SUN G06P3-EU Series? Browse the full list of codes for this device, with the cause and recommended fix for each.
View error codes for this device →Yes. The SUN-15K-G05 is rated -25 to 65 °C, with derating above 45 °C, which covers the heat and dust of the Gulf, North Africa and the wider MEA region. Mount it in shade for the best summer output. Its IP 65 rating handles dust and humidity.
The Anti-Potential Induced Degradation (PID) function protects PV modules from performance decline, extending their operational lifespan and maintaining high efficiency over time.
The inverter supports multiple monitoring options including GPRS, WiFi, Bluetooth, 4G, and LAN connectivity, plus RS485 and RS232 communication interfaces.