Thin-cable high voltage
512 V nominal across a 448-584 V window keeps maximum current at just 20 A.
Deye Solar Inverters & Lithium Batteries: Prices in UAE — Authorized DistributorDeye 10 kWh 512 V Lithium Solar Battery SS-F10

A 10 kWh high-voltage (512 V) LiFePO4 wall battery with IP65 protection, charging down to -20 degrees Celsius and up to six units in parallel for a stated 60 kWh.
Authorised Deye distributor for the UAE — certificate No. GFKFLFI1.
Deye battery SS-F10 price in the UAE: AED 6,000.
In stock
Our retail price in the UAE: we sell direct and deliver within 3 business days.
Become our retailer in your country and get wholesale pricingSize the system for this unitPre-sized systems
Or collect it yourself — no carriage
High-voltage architecture keeps currents small and cables thin: at 512 V nominal, the Deye SS-F10 moves 10 kWh with a maximum of just 20 A, operating across a 448-584 V window with high-voltage battery inverters. The IP65 enclosure shrugs off dust and water, and the pack both charges and discharges from -20 to 55 degrees Celsius - cold mornings included - with humidity tolerance up to 100%. Six units can parallel into a stated 60 kWh system. A master-slave BMS with passive balancing manages the LiFePO4 cells, optional DC arc detection adds a further safeguard, and SOC plus fault codes surface on the indicator. Rated beyond 6,000 cycles to 70% end-of-life capacity with a recommended 90% depth of discharge, the 85 kg, 850 x 650 x 170 mm slab mounts on a wall or floor and carries a stated 10-year warranty. Communication with the inverter runs over CAN2.0 and RS485. We are an authorised Deye distributor and supply the SS-F10 from our own stock, with technical support before and after the sale.
Specifications last updated 24 January 2026
| Energy | 10 kWh |
|---|---|
| System Energy | 10 kWh |
| Max. Capacity | 60 kWh |
| Nominal Voltage | 512 V |
| System Nominal Voltage | 512 V |
| Operating Voltage | 448-584 V |
| Rated Capacity | 20 Ah |
| Cell Chemistry | LiFePO4 |
| Cycle Life | >6000 |
| End-of-Life Capacity | 70 % |
| Recommended Depth of Discharge | 90 % |
| Max. Charge Current | 20 A |
| Max. Discharge Current | 20 A |
| Max. Charge/Discharge Current | 20 A |
| Recommended Charge/Discharge Current | 10 A |
| Min. Battery Module Quantity | 1 |
| Parallel Units | 6 |
| Protection Features | Master-Slave BMS, Passive Balancing, DC Arc Detection (optional) |
| Warranty (Years) | 10 |
| Communication Ports | CAN2.0, RS485 |
|---|---|
| Dimensions | 850 x 650 x 170 mm |
| Status Indicator | SOC, fault codes |
| Weight | 85 kg |
| Altitude | <3000 m |
|---|---|
| Charge Temperature | -20 to 55 °C |
| Discharge Temperature | -20 to 55 °C |
| Operating Humidity | 0-100 % |
| Installation Location | Wall-Mounted, Floor-Mounted |
| Enclosure IP Rating | IP65 |
| Storage Temperature | 0-35 °C |
| Working Temperature | Charge/Discharge: -20 to 55 °C |








19 Deye battery records state a 0-55 °C charge window, five state -20 to 55 °C, and 30 state a 0-35 °C storage window. What those three figures mean for a garage in a UAE summer.
Read: Can You Put a Solar Battery in a Dubai Garage? →Every capacity the Deye battery records state: 20, 39, 40, 100, 120, 200, 208, 235, 280 and 314 Ah, 1.28 to 4340 kWh — and how your own figure gets built.
Read: Deye Battery Capacities in Saudi Arabia: 20 Ah to 314 Ah →What does Batt-V mean on a Deye inverter? Understand the Deye battery type setting and how to choose between low-voltage (SE-G5.1, SE-F5, RW) and high-voltage (GB-L Pro, BOS-G, BOS-A) batteries for your system.
Read: Deye Battery Type Explained: Batt-V, Low-Voltage vs High-Voltage →A high-voltage battery inverter: the SS-F10 runs at 512 V nominal across a 448-584 V operating window.
Its IP65 rating and 0-100% humidity tolerance are built for demanding placements, with operation from -20 to 55 degrees Celsius; altitude must stay below 3,000 m.
No - charging is specified down to -20 degrees Celsius, the same lower bound as discharge.
Up to six units in parallel, for a stated maximum of 60 kWh.
A master-slave BMS with passive balancing, and optional DC arc detection; the recommended operating current is 10 A against a 20 A maximum.