61Fault

DEYE inverter error 61 (F61)

Reactor A phase over current

Also displayed as F61 on some models.

Fault — the inverter cuts its output and the red LED stays solid until the fault is cleared.

The exact meaning depends on your model:

SUN G01P3-EU-BM8 Series

InverterFault

Also applies to:SUN-120K-G01P3-EU-BM8SUN-125K-G01P3-EU-BM8SUN-130K-G01P3-EU-BM8SUN-135K-G01P3-EU-BM8SUN-136K-G01P3-EU-BM8SUN-7K-G02P1-EU-AM2SUN-7.5K-G02P1-EU-AM2SUN-8K-G02P1-EU-AM2+3

What it means

Reactor A phase over current — Over-current through filter reactor phase A. The manual notes this code has hardly ever appeared in the field.

Cause: The current through filter reactor phase A exceeded the over-current limit.

How to fix it

Restart the inverter; if the code persists after the restart, contact your installer or Deye service and provide the inverter serial number, the installation date and the displayed error code.

Source: 041_BManual_SUN-120_125_130_135_136K-G01P3-EU-BM8_20251021_en_a2166559.pdf, p.64 · 065_BManual_SUN-7_7.5_8K-G02P1-EU-AM2_20260625_en_4466f08b.pdf, p.53 · 032_BManual_SUN-9_10_10.5K-G02P1-EU-AM2_20260625_en_df0f2106.pdf, p.53

SUN G03/G01P3-AM8 Series

InverterFault

Also applies to:SUN-60K-G03SUN-70K-G03SUN-75K-G03SUN-80K-G03SUN-90K-G03SUN-100K-G03SUN-110K-G03SUN-60K-G01P3-EU-AM8-LV+7

What it means

Reactor A phase over current — Over-current through filter reactor phase A.

Cause: The current through filter reactor phase A exceeded the over-current limit.

How to fix it

Restart the inverter; if the fault is not ruled out, contact the installer or the manufacturer's customer service.

Source: 042_BManual_SUN-120_125_130_135_136K-G01P3-EU-AM8_20260702_en_05f936e3.pdf, p.63 · 060_BManual_SUN-60_70_75K-G01P3-EU-AM8-LV_20260701_en_f559aeec.pdf, p.63 · 067_BManual_SUN-60_70_75_80K-G03_20260309_en_a0739b4b.pdf, p.63

SUN G04/G05/G06 3-Phase

InverterFault

Also applies to:SUN-6K-G06-LV-P1SUN-8K-G06-LV-P1SUN-6K-G06P3-EU-BM2-LV-P1SUN-8K-G06P3-EU-BM2-LV-P1SUN-10K-G05-LVSUN-12K-G05-LVSUN-15K-G05-LVSUN-15K-G06P3-EU-BM2-P1+27

What it means

Reactor A phase over current — Over-current through filter reactor phase A.

Cause: The current through reactor (filter inductor) phase A exceeded its limit.

How to fix it

Restart the inverter; if the fault is not ruled out, contact the installer or manufacturer customer service.

Source: 063_BManual_SUN-6K-G06-LV-P1_20250923_en_30a96699.pdf, p.59

SUN G04P1/G05P1 Series

InverterFault

Also applies to:SUN-1K-G04P1-EU-AM1SUN-1.5K-G04P1-EU-AM1SUN-2K-G04P1-EU-AM1SUN-2.2K-G04P1-EU-AM1SUN-2.5K-G04P1-EU-AM1SUN-2.7K-G04P1-EU-AM1SUN-3K-G04P1-EU-AM1SUN-3.3K-G04P1-EU-AM1+36

What it means

Reactor A phase over current — Over-current through filter reactor phase A.

Cause: The current through reactor (filter inductor) phase A exceeded its limit.

How to fix it

Deye states this code has hardly ever appeared in the field; contact your installer or Deye service if it occurs.

Source: 031_BManual_SUN-1_1.5_2_2.2_2.5_2.7_3_3.3_3.6_4K-G04P1-EU-AM1_20260624_en_15adc00c.pdf, p.55 · 036_BManual_SUN-3_4_5_6_7_8_9_10_12_15K-G06P3-EU-BM2_20250506_en_0eb78440.pdf, p.59

SUN SG01HP3/SG02HP3 Hybrid

InverterFault

Also applies to:SUN-5K-SG01HP3-EU-AM2SUN-6K-SG01HP3-EU-AM2SUN-8K-SG01HP3-EU-AM2SUN-10K-SG01HP3-EU-AM2SUN-12K-SG01HP3-EU-AM2SUN-15K-SG01HP3-EU-AM2SUN-20K-SG01HP3-EU-AM2SUN-25K-SG01HP3-EU-AM2+9

What it means

Inverter Manually Off — INVERTER_Manual_OFF - the inverter has been switched off manually.

Cause: The inverter's power switch is turned off (manual shutdown).

How to fix it

Check whether the switch of the inverter is turned on, restart the inverter, and restore the factory settings.

Source: 037_BManual_SUN-5_6_8_10_12_15_20_25K-SG01HP3-EU-AM2_20260224_en_9ef2717c.pdf, p.52 · 050_BManual_SUN-29.9_30_35_40_50K-SG01HP3-EU-BM3_4_20260224_en_544e1b2f.pdf, p.53 · 062_BManual__SUN-60_70_75_80K-SG02HP3-EU-EM6_20260224_en_38cbc9f6.pdf, p.53

Frequently asked questions

What does error 61 mean on a DEYE inverter?
It depends on the model — 7 devices use code 61. On the SUN G01P3-EU-BM8 Series it means: Reactor A phase over current. The card for each model on this page gives its exact meaning and fix.
Is error 61 a fault or a warning?
61 is a fault code: the inverter cuts its output and the red LED stays solid until it is cleared.
How do I clear or fix error 61?
Restart the inverter; if the code persists after the restart, contact your installer or Deye service and provide the inverter serial number, the installation date and the displayed error code. The exact steps for each affected model are listed on this page.

Related error codes

Other codes on the SUN G01P3-EU-BM8 Series

All SUN G01P3-EU-BM8 Series codes All SUN G02P1-EU Series codes

Other codes on the SUN G03/G01P3-AM8 Series

All SUN G03/G01P3-AM8 Series codes

Other codes on the SUN G04/G05/G06 3-Phase

All SUN G04/G05/G06 3-Phase codes

Other codes on the SUN G04P1/G05P1 Series

All SUN G04P1/G05P1 Series codes All SUN G06P3-EU Series codes

Other codes on the SUN SG01HP3/SG02HP3 Hybrid

All SUN SG01HP3/SG02HP3 Hybrid codes

Prefer the full written guide? Read the complete DEYE inverter error-code guide

Compiled from official DEYE user manuals. Always consult your device manual and a qualified technician before performing repairs.