DEYE SUN-10K-SG06LP1-EU-CM3 Hybrid Solar Inverter

Solar InvertersModel SUN-10K-SG06LP1-EU-CM3

Deye 10 kW Single-Phase Hybrid Solar Inverter SUN-10K-SG06LP1-EU-CM3

Replaces the retired models: SUN-10K-SG05LP1-EU-SM2-P

AED 4,790incl. VAT

In stock

Power: 10 kW

Ask on WhatsApp
Inverter Type
Hybrid Inverter
Rated AC Output Active Power
10000 W
Max. Efficiency
97.6 %
Number of MPPTs
2
Grid Connection Form
L+N+PE

Description

10kW (10000W) single-phase hybrid inverter with battery backup and 210A charging — sized for the largest homes and farms.

Deye SUN-10K-SG06LP1-EU-CM3, 10 kW, is also searched as deye hybrid inverter, deye inverter.

Deye 10 kW Single-Phase Hybrid Solar Inverter SUN-10K-SG06LP1-EU-CM3 is best for

  • Buildings on a single-phase supply
  • Battery backup through power cuts, with solar stored for the evening and night
  • Lithium or lead-acid battery banks
  • Sites that also run a diesel generator
  • Villas and large homes
  • Outdoor installation (IP65 enclosure)

Deye 10 kW Single-Phase Hybrid Solar Inverter SUN-10K-SG06LP1-EU-CM3 full specifications

Key specifications

AC Coupling SupportYes
AC Output Overcurrent ProtectionYes
AC Output Overvoltage ProtectionYes
AC Output Short-Circuit ProtectionYes
AC Voltage Tolerance (×Un)0.85-1.1
Anti-Islanding ProtectionYes
Arc Fault Circuit Interrupter (AFCI)Optional
Battery Parallel SupportYes
All specifications (60)

Electrical(38)

Battery TypeLead-acid or Lithium-ion
Battery Voltage Range40-60 V
Charge/Discharge Time Periods6
Charging StrategySelf-adaption to BMS
DC Component MonitoringYes
DC Injection Current (% of In)<0.5
DC Reverse Polarity ProtectionYes
European Efficiency96.5 %
Generator SupportYes (Diesel)
Insulation Impedance DetectionYes
Inverter TopologyNon-Isolated
Max. AC Output Apparent Power11000 VA
Max. AC Output Current50/47.9 A
Max. Charge Current210 A
Max. Continuous AC Pass-Through Current50 A
Max. Discharge Current210 A
Max. Input Short-Circuit Current34+34 A
Max. Operating PV Input Current26+26 A
Max. PV Access Power20000 W
Max. PV Input Power16000 W
Max. PV Input Voltage500 V
MPPT Efficiency>99 %
MPPT Voltage Range150-425 V
Number of Battery Inputs1
Overvoltage CategoryOVC II(DC), OVC III(AC)
Parallel Units16
Peak Power (Multiple × Duration)2*10 s
Power Factor Range (Leading to Lagging)0.8-0.8
Rated AC Output Current45.5/43.5 A
Rated Grid Frequency50/45-55, 60/55-65 Hz
Rated Output Voltage220/230 V
Rated PV Input Voltage370 V
Residual Current DetectionYes
Startup Voltage125 V
Strings per MPPT2+2
Surge Protection LevelTYPE II(DC), TYPE II(AC)
Current Total Harmonic Distortion (THDi)<3 %
Warranty (Years)5

Mechanical(6)

Cabinet Dimensions330 x 580 x 232 mm
Communication InterfacesRS485, CAN, Wi-Fi
DC SwitchYes
LCD/LED DisplayColorful Touch LCD
Monitoring ModesGPRS, Wi-Fi, Bluetooth, 4G, LAN (optional)
Weight24.9 kg

Environmental(8)

Derating Start Temperature45 °C
IP RatingIP65
Noise Level<30 dB
Operating Temperature Range-40 to 60 °C
Max. Operating Altitude2000 m
Permissible Ambient Humidity0-100 %
Thermal ProtectionYes
Cooling TypeIntelligent Air Cooling

Certifications(23)

  • IEC 61727
  • IEC 62116
  • CEI 0-21
  • EN 50549
  • NRS 097
  • RD 140
  • UNE 217002
  • OVE-Richtlinie R25
  • G98
  • G99
  • VDE-AR-N 4105
  • IEC 61000-6-1
  • EN 61000-6-1
  • IEC 61000-6-2
  • EN 61000-6-2
  • IEC 61000-6-3
  • EN 61000-6-3
  • IEC 61000-6-4
  • EN 61000-6-4
  • IEC 62109-1
  • EN 62109-1
  • IEC 62109-2
  • EN 62109-2

Complete the system

In our kits, this model is paired with:

Systems that use this model:

In the same series:

Deye 10 kW Single-Phase Hybrid Solar Inverter SUN-10K-SG06LP1-EU-CM3 features

  • 210A Charging

    Ultra-high battery charging

  • Touch LCD Display

    Colorful intuitive interface

  • 16 Units Parallel

    Scale up to 160kW

  • AC Coupling

    Retrofit existing systems

  • 6 Time Periods

    Advanced battery management

  • Generator Support

    Store diesel generator energy

About the Deye 10 kW Single-Phase Hybrid Solar Inverter SUN-10K-SG06LP1-EU-CM3

The Deye SUN-10K-SG06LP1-EU-CM3 is a single-phase hybrid inverter from the SG06LP1 family, rated at 10 kW of AC output active power on an L+N+PE connection. When the utility drops, it carries a large villa or a working farm on stored energy alone: the battery port discharges at up to 210 A, and a 50 A continuous AC pass-through keeps pumps, chillers and the whole distribution board live rather than moving critical circuits to a backup panel. Two MPPT trackers take two strings each, 2+2, up to 16 kW of PV input power and 20 kW of connected array, with a 500 V input ceiling and a 150-425 V tracking window that opens from a 125 V startup voltage. On the grid side the unit supplies 220/230 V at 50 or 60 Hz and up to 11 kVA of apparent power, and 16 units wire in parallel. Lead-acid or lithium batteries at 40-60 V and a diesel generator input are supported. It carries a stated 5-year warranty. We are an authorised Deye distributor and supply the SUN-10K-SG06LP1-EU-CM3 from our own stock, with technical support before and after the sale.

Specifications last updated 26 October 2026

Where to collect your order

Frequently Asked Questions

Is the Deye SUN-10K-SG06LP1-EU-CM3 suitable for the Middle East climate?

Yes. The SUN-10K-SG06LP1-EU-CM3 is rated -40 to 60 °C, with derating above 45 °C, which covers the heat and dust of the Gulf, North Africa and the wider MEA region. Mount it in shade for the best summer output. Its IP65 rating handles dust and humidity.

How many time periods can I set?

You can configure up to 6 different time periods for battery charging and discharging, allowing optimal energy usage based on specific demands and electricity pricing.

Customer reviews