03Fault

DEYE inverter error 03 (F003)

DC leakage current fault

Also displayed as F003 / F03 on some models.

Fault — the inverter cuts its output and the red LED stays solid until the fault is cleared.

The exact meaning depends on your model:

SUN G01P3-EU-BM8 Series

InverterFault

Also applies to:SUN-120K-G01P3-EU-BM8SUN-125K-G01P3-EU-BM8SUN-130K-G01P3-EU-BM8SUN-135K-G01P3-EU-BM8SUN-136K-G01P3-EU-BM8SUN-7K-G02P1-EU-AM2SUN-7.5K-G02P1-EU-AM2SUN-8K-G02P1-EU-AM2+3

What it means

DC leakage current fault — Leakage current on the DC side exceeds the protection limit. The manual notes this code has hardly ever appeared in the field.

Cause: Leakage current from the DC side to ground exceeds the protection threshold, typically caused by damaged PV cable or module insulation.

How to fix it

Restart the inverter; if the code persists after the restart, contact your installer or Deye service and provide the inverter serial number, the installation date and the displayed error code.

Source: sun-120k-g01p3-eu-bm8-sun-125k-g01p3-eu-bm8-sun-130k-g01p3-eu-bm8-manual.pdf, p.61 · sun-7k-g02p1-eu-am2-sun-7-5k-g02p1-eu-am2-sun-8k-g02p1-eu-am2-manual.pdf, p.50 · sun-9k-g02p1-eu-am2-sun-10k-g02p1-eu-am2-sun-10-5k-g02p1-eu-am2-manual.pdf, p.50

SUN G03/G01P3-AM8 Series

InverterFault

Also applies to:SUN-60K-G03SUN-70K-G03SUN-75K-G03SUN-80K-G03SUN-90K-G03SUN-100K-G03SUN-110K-G03SUN-60K-G01P3-EU-AM8-LV+7

What it means

DC leakage current fault — Leakage current on the DC side exceeds the protection limit.

Cause: Leakage current from the DC side to ground exceeds the protection threshold, typically caused by damaged PV cable or module insulation.

How to fix it

Restart the inverter; if the fault is not ruled out, contact the installer or the manufacturer's customer service.

Source: sun-70k-g03-sun-75k-g03-sun-80k-g03-sun-90k-g03-sun-100k-g03-sun-110k-g03-manual.pdf, p.60 · sun-120k-g01p3-eu-am8-manual.pdf, p.60 · sun-60k-g01p3-eu-am8-lv-sun-70k-g01p3-eu-am8-lv-sun-75k-g01p3-eu-am8-lv-manual.pdf, p.60 · +1 more official manuals

SUN G04/G05/G06 3-Phase

InverterFault

Also applies to:SUN-6K-G06-LV-P1SUN-8K-G06-LV-P1SUN-6K-G06P3-EU-BM2-LV-P1SUN-8K-G06P3-EU-BM2-LV-P1SUN-10K-G05-LVSUN-12K-G05-LVSUN-15K-G05-LVSUN-15K-G06P3-EU-BM2-P1+27

What it means

DC leakage current fault — Leakage (residual) current on the DC side exceeded the protection limit.

Cause: Residual-current monitoring measured DC-side leakage current above the limit, typically from damaged insulation creating a current path to ground.

How to fix it

Restart the inverter; if the fault is not ruled out, contact the installer or manufacturer customer service.

Source: sun-6k-g06-lv-p1-manual.pdf, p.56

SUN G04P1/G05P1 Series

InverterFault

Also applies to:SUN-1K-G04P1-EU-AM1SUN-1.5K-G04P1-EU-AM1SUN-2K-G04P1-EU-AM1SUN-2.2K-G04P1-EU-AM1SUN-2.5K-G04P1-EU-AM1SUN-2.7K-G04P1-EU-AM1SUN-3K-G04P1-EU-AM1SUN-3.3K-G04P1-EU-AM1+36

What it means

DC leakage current fault — Leakage (residual) current on the DC side exceeded the protection limit.

Cause: Residual-current monitoring measured DC-side leakage current above the limit, typically from damaged insulation creating a current path to ground.

How to fix it

Deye states this code has hardly ever appeared in the field; contact your installer or Deye service if it occurs.

Source: sun-2-7k-g04p1-eu-am1-sun-3k-g04p1-eu-am1-sun-3-3k-g04p1-eu-am1-sun-3-6k-g04p1-eu-am1-sun-4k-g04p1-eu-am1-manual.pdf, p.52 · sun-7k-g06p3-eu-bm2-sun-8k-g06p3-eu-bm2-sun-9k-g06p3-eubm2-sun-10k-g06p3-eu-bm2-sun-12k-g06p3-eu-bm2-manual.pdf, p.56

SUN SG01HP3/SG02HP3 Hybrid

InverterFault

Also applies to:SUN-5K-SG01HP3-EU-AM2SUN-6K-SG01HP3-EU-AM2SUN-8K-SG01HP3-EU-AM2SUN-10K-SG01HP3-EU-AM2SUN-12K-SG01HP3-EU-AM2SUN-15K-SG01HP3-EU-AM2SUN-20K-SG01HP3-EU-AM2SUN-25K-SG01HP3-EU-AM2+9

What it means

GFDI Failure — GFDI_Failure - the ground fault detector/interrupter has detected a fault on the PV side.

Cause: The PV modules are not grounded, or the PV-to-ground impedance is abnormal and leakage current is present.

How to fix it

  1. Check whether the PV modules are grounded
  2. Check whether the impedance of the PV to ground is normal and whether there is leakage current.

Source: sun-12k-sg01hp3-eu-am2-manual.pdf, p.48 · sun-29.9-30-35-40-50k-sg01hp3-eu-bm3-4-20260224-en-manual.pdf, p.49 · sun-60-70-75-80k-sg02hp3-eu-em6-20260224-en-manual.pdf, p.49

GB-A HV Battery

BatteryFault

Also applies to:GB-A

What it means

ALARM_ID_CHG_OVER_TEMP_LEV_2 — Charging temperature is too high.

Cause: Cell temperature exceeded the charging over-temperature limit - high ambient temperature, poor ventilation, or sustained high charge current.

How to fix it

Stop charging and let the battery cool; improve ventilation and keep the battery within its rated charge temperature range.

Source: gb-a-pack6-gb-a4-gb-a10-gb-a16-manual.pdf, p.12

Frequently asked questions

What does error 03 mean on a DEYE inverter?
It depends on the model — 8 devices use code 03. On the SUN G01P3-EU-BM8 Series it means: DC leakage current fault. The card for each model on this page gives its exact meaning and fix.
Is error 03 a fault or a warning?
03 is a fault code: the inverter cuts its output and the red LED stays solid until it is cleared.
How do I clear or fix error 03?
Restart the inverter; if the code persists after the restart, contact your installer or Deye service and provide the inverter serial number, the installation date and the displayed error code. The exact steps for each affected model are listed on this page.

Related error codes

Other codes on the SUN G01P3-EU-BM8 Series

All SUN G01P3-EU-BM8 Series codes All SUN G02P1-EU Series codes

Other codes on the SUN G03/G01P3-AM8 Series

All SUN G03/G01P3-AM8 Series codes

Other codes on the SUN G04/G05/G06 3-Phase

All SUN G04/G05/G06 3-Phase codes

Other codes on the SUN G04P1/G05P1 Series

All SUN G04P1/G05P1 Series codes All SUN G06P3-EU Series codes

Other codes on the SUN SG01HP3/SG02HP3 Hybrid

All SUN SG01HP3/SG02HP3 Hybrid codes

Other codes on the GB-A HV Battery

All GB-A HV Battery codes

Prefer the full written guide? Read the complete DEYE inverter error-code guide

Compiled from official DEYE user manuals. Always consult your device manual and a qualified technician before performing repairs.